User guide

ManualsBrandsAleratec ManualsOther350117

Quick Start Guide

Included Items

• 1:3 HDD Copy Dock Duplicator™

• USB 3.0 Cable

• eSATA Cable

• Power Adapter and Cord

• Quick Start Guide (this document)

• User Guide

• Aleratec Registration Card

Product Features

The 1:3 HDD Copy Dock Duplicator™ is a Hard Disk Drive Duplicator that can also function as

a Hard Disk Drive USB Docking Station.

• Makes Hard Disk Drive copies/backups

• Quick-load drive bays

• Supports 2.5” and 3.5” SATA Hard Disk Drives

• Supports Compact Flash (CF) memory, CFast Memory and 50mm

mSATA SSDs with optional adapters, not included.

Key Items on the 1:3 HDD Copy Dock Duplicator

1:3 HDD Copy Dock Duplicator™ Part No. 350117

SATA HDD

Drive Slots

USB 3.0 Port eSATA Port

Power Cord

Port

Display

Panel

Controller

Buttons

Main

Power

Button

HDD Release

Buttons

Individual

HDD Power Buttons

Summary of Operation

Duplicating Hard Drives

The “Copy HDD” function performs an actual copy from the source HDD to the target HDDs. The target HDDs must

be at least as large as the source. The 1:3 HDD Copy Dock will copy every block of capacity on the source HDD.

1. Use the included power adapter and cord to plug the

HDD Copy Dock Duplicator

into a power outlet.

2. Insert the SATA Hard Drive you want to copy into the slot marked “SOURCE DISK 4”. When inserting, align the SATA port on the

Hard Drive with the SATA connector in the drive bay slot. Press the “SOURCE DISK 4” power button on the front of the unit to

power up the drive.

3. Insert the destination SATA Hard Drives into the slots marked “TARGET DISK 1”, “TARGET DISK 2” and “TARGET DISK 3”. When

inserting, align the SATA port on the Hard Drive with the SATA connector in the drive bay slot. Press the power button on the

front of the unit to power up the drive target drive(s).

Note: Make sure the target Hard Drive has the same or higher capacity than your source Hard Drive. The duplication

process will not start if the target drive has a lower capacity. Also make sure the unit is not connected to a PC through

the USB or eSATA ports.

4. Push the main power button to turn the unit on.

Continued on back...

Summary of content (2 pages)

PAGE 1
Quick Start Guide 1:3 HDD Copy Dock Duplicator™ Included Items • • • • • • • 1:3 HDD Copy Dock Duplicator™ USB 3.0 Cable eSATA Cable Power Adapter and Cord Quick Start Guide (this document) User Guide Aleratec Registration Card Part No. 350117 Product Features The 1:3 HDD Copy Dock Duplicator™ is a Hard Disk Drive Duplicator that can also function as a Hard Disk Drive USB Docking Station. • • • • Makes Hard Disk Drive copies/backups Quick-load drive bays Supports 2.5” and 3.
PAGE 2
Summary of Operation (Continued) 5. Push the DOWN button to select the Duplicator Mode menu item and press ENT. Press ENT two more times to switch to Duplicator Mode. The system will auto-detect the hard drives. After the drives have been detected, a screen similar to the one below will be displayed: == Dup. Menu == HDD Duplicator 1. 1-1Copy HDD ver: 0.92C UP ENT DOWN ESC POWER Note: Before copying be sure that the capacity of the target HDD is equal to or larger than the source hard drive. 6.