User manual

3
Quick Setup
1. First, ensure that the transmitter has been fully charged.
2. Connect your dynamic microphone to the transmitter.
3. Use a standard 1/4" cable (not included) to connect the receiver's Output to your mixer or
powered speaker.
4. Install batteries or use the included power adapter to provide power to the receiver.
5. Flip the power switch to the "On" position for the transmitter and receiver.
6. Press the Pair Button on the receiver and hold the Pair Button on the transmitter for 3 seconds.
The pair LED will be lit solid on the transmitter and receiver when they have successfully
connected.
7. Set the receiver antenna to a vertical position.
8. Set the volume control on the receiver to the highest level possible without distorting or clipping
the mixer or powered speaker. This level will vary with the settings of mixer or powered speaker
gain and/or volume.
Connection Diagram
Transmitter
Receiver
Powered
Speake
r
*
Microphone*
or
Mixer*
*sold separately