User Guide English ( 3 – 13 ) Guía del usuario Español ( 14 – 24 ) Guide d’utilisation Français ( 25 – 35 ) Guida per l’uso Italiano ( 36 – 46 ) Benutzerhandbuch Deutsch ( 47 – 57 ) Appendix English ( 58 )
User Guide (English) Introduction Box Contents Recital 61 Digital Piano User Guide Power Adapter Safety & Warranty Manual Music Rest Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit alesis.com. For additional product support, visit alesis.com/support. Setup Music Rest Step 1 Step 2 Detail Connection Diagram Items not listed in Introduction > Box Contents are sold separately.
Features Top Panel 2 3 7 4 1 8 5 1. 2. 6 Power: This switch turns the piano’s power on or off. In order to save energy, the piano will automatically shut down after 30 minutes if it is not used. Master Volume: This knob adjusts the master volume for the Line Output and Headphone Output. Note: The internal speakers will be muted if there are headphones plugged into the Headphone Output.
Operation Demos Playing Demo Songs The Recital 61 Digital Piano features 2 demo songs. To play the demo songs: 1. Press and release the Split and Layer buttons at the same time. The Recital 61 will enter Demo Mode and play the demo songs in a continuous loop. The two button LEDs will flash during demo playback. 2. To exit Demo Mode, press and release the Split and Layer buttons again. Playing Voice Demos Each Voice on the panel is preset with a voice demo.
Layer Mode Layer Mode allows for two different voices to be layered together for a fuller and richer sound. To enable Layer Mode: 1. Press the Layer button to enter Layer Mode. The Layer button LED will be lit green. 2. Select the first voice by pressing one of the Voice buttons to choose between its Original or Variation voice. 3. Press the Layer button again. The Layer button LED will be lit red. 4.
Advanced Function Mode You can edit many functions on your Recital 61 by entering Advanced Function Mode. To enter Advanced Function Mode, press the Metronome and Lesson buttons at the same time. The two button LEDs will be lit. Then use the keys corresponding to the desired setting (as pictured below). More details on the adjustable settings can be found in the next few pages of this user guide. To exit Advanced Function Mode, press the Metronome and Lesson buttons at the same time again.
Voice Volume You can set the volume of each voice in Layer Mode and the split voice in Split Mode. To set the volume of the upper voice in Layer Mode: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2. Following the diagram on page 7, use the keys marked Upper Volume 1-2-3 to set the volume. 1 is the lowest volume, and 3 is the highest volume. 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Touch Sensitivity The Recital 61 Digital Piano is equipped with touch response for controlling volume level with your playing strength—just like an acoustic piano. That means the harder you play the keys, the more volume you’ll hear from the speakers. Turning this function off results in a fixed volume level, no matter how hard or soft you play the keys. The touch settings are Off, 1, 2, and 3. To set the touch sensitivity: 1.
Metronome The metronome feature provides a steady beat to aid in practicing at a consistent tempo. To turn the metronone on or off, press the Metronome button. When the metronome is in use, the Metronome button LED will flash along with the current tempo. The tempo of the metronome can be freely adjusted from 30 to 280 beats per minute. To set the metronome tempo: 1. Press the Metronome and Lesson buttons at the same time to enter the Advanced Function mode. The two button LEDs will be lit. 2.
Effects With the Recital 61, you can add adjustable Reverb and/or Chorus effects to your sound. To enable the effects: 1. Press the Reverb/Chorus button once to turn on the reverb effect. The button LED will be lit green when only the Reverb effect is enabled. 2. Press the Reverb/Chorus button again to turn off the reverb effect and turn on the chorus effect. The button LED will be lit red when only the Chorus effect is enabled. 3.
Pedal Resonance Pedal resonance is a function that simulates the reverberation of notes when pressing the sustain pedal on an acoustic piano. When you use the included sustain pedal with Pedal Resonance enabled, the Recital 61 reproduces the rich harmonics and other unique sound characteristics of an acoustic piano. To turn Pedal Resonance on or off: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The two button LEDs will be lit. 2.
Auto Power Off In order to save energy, the Recital 61 Digital Piano will automatically shut down after 30 minutes if it is not used. To enable or disable the Auto Power Off function: 1. Press the Metronome and Lesson buttons at the same time to enter Advanced Function Mode. The button LEDs will be lit. 2. Following the diagram on page 7, use the key marked Auto Pwr to enable or disable the Auto Power Off function. 3. Press both the Metronome and Lesson buttons again to exit Advanced Function Mode.
Guía del usuario (Español) Introducción Contenido de la caja Piano Digital Recital 61 Guía del usuario Adaptador de corriente Manual sobre la seguridad y garantía Atril Soporte Para obtener la información más reciente acerca de este producto (requisitos de sistema, información de compatibilidad, etc.) y registrarlo, visite alesis.com. Para obtener soporte adicional del producto, visite alesis.com/support.
Características Panel superior 2 3 7 4 1 8 5 6 1. Interruptor de encendido: Enciende y apaga el teclado. Para ahorrar energía, el piano se apagará automáticamente tras 30 minutos de inactividad. 2. Perilla de volumen maestro: Ajusta el volumen maestro de la Salida de línea y la Salida para auriculares.
Funcionamiento Canciones demo Cómo reproducir canciones demo El piano digital Recital 61 cuenta con dos canciones demo. Cómo reproducir las canciones demo: 1. Pulse el botón División y el botón Layer al mismo tiempo. El piano digital Recital 61 entrará al modo demo y reproducirá las canciones demo en un bucle continuo. Los LED de los dos botones parpadearán durante la reproducción de la demo. 2. Para salir del modo demo, pulse y suelte los botones División y Layer a la vez de nuevo.
Modo de capas El modo de capas permite tocar dos voces diferentes en capas para lograr un sonido más completo y rico. Para activar el modo de capas: 1. Pulse el botón Layer para activar el modo de capas. El LED del botón Layer se iluminará de verde. 2. Seleccione la primera voz pulsando uno de los botones Voice para elegir entre su voz original o la variación. 3. Presione el botón Layer otra vez. El LED del botón Layer se iluminará de rojo. 4.
Modo de funciones avanzadas Puede editar muchas de las funciones de su Recital 61 entrando al modo de funcionamiento avanzado. Para entrar al modo de funcionamiento avanzado, pulse los botones Metronome y Lesson al mismo tiempo. Se encenderán los LED de ambos botones. Luego utilice las teclas que corresponden al ajuste deseado (como se ilustras a continuación). En las siguientes páginas de esta guía del usuario se pueden encontrar más detalles sobre los ajustes configurables.
Volumen de la voz Puede ajustar el volumen de cada voz en el modo de capas y la voz de división del modo de división. Para modificar el volumen de la voz superior en el modo de capas: 1. Pulse los botones Lesson y Metronome al mismo tiempo para entrar al modo de funciones avanzadas. Se encenderán los LED de ambos botones. 2. Utilice las teclas marcadas como Upper Volume 1-2-3 para modificar el volumen. 1 es el volumen más bajo y 3 es el volumen más alto. 3.
Sensibilidad El piano digital Recital 61 está equipado con una respuesta táctil para controlar el nivel de la voz según la fuerza con la que toca - al igual que los pianos acústicos. Esto significa que mientras más fuerte toque las teclas, mayor será el volumen que saldrá por los altavoces. Apagar esta función genera una respuesta táctil fija, sin importar lo fuerte o suave que toque las teclas. Los ajustes de sensibilidad son Off (Apagado), 1, 2 y 3. Para ajustar la sensibilidad táctil: 1.
Metrónomo La característica de metrónomo brinda un pulso constante para ayudar a practicar a un tempo consistente. Para activar o desactivar el metrónomo, pulse el botón Metronome. Cuando el metrónomo esté en uso, el LED del botón Metronome parpadeará al ritmo del tempo actual. El tempo del metrónomo puede ajustarse libremente entre 30 y 280 beats por minuto. Para ajustar el tempo del metrónomo: 1. Pulse los botones Metronome y Lesson al mismo tiempo para entrar al modo de funciones avanzadas.
Efectos Con el Recital 61, podrá añadir efectos de reverberación y/o coro ajustables a su sonido. Cómo activar los efectos: 1. Pulse el botón Reverb/Chorus una vez para activar el efecto de reverberación. El LED del botón se iluminará de verde solamente cuando el efecto de reverberación esté activado. 2. Pulse el botón Reverb/Chorus otra vez para desactivar el efecto de reverberación y activar el efecto de cobro. El LED del botón se iluminará de rojo solamente cuando el efecto de coro esté activado. 3.
Resonancia de pedal La resonancia de pedal es una función que simula la reverberación de notas al pulsar el pedal de sostenido en un piano real. Con la resonancia de pedal activada, Recital 61 reproduce los ricos armónicos y las características únicas del sonido de un piano real cuando se utiliza el pedal de sostenido. Para encender o apagar el pedal de resonancia: 1. Pulse los botones Lesson y Metronome al mismo tiempo para entrar al modo de funciones avanzadas. Se encenderán los LED de ambos botones. 2.
Restauración de los ajustes predeterminados de fábrica Para restaurar el Recital 61 a sus ajustes predeterminados de fábrica, mantenga pulsado los botones Layer y Lesson mientras enciende el piano digital Recital 61. Todos los ajustes se restaurarán a sus valores predeterminados. Nota: El Recital 61 no puede encontrarse en modo de funcionamiento avanzado cuando usted restaure los ajustes a sus valores predeterminados de fábrica.
Guide d’utilisation (Français) Présentation Contenu de la boîte Piano numérique Recital 61 Guide d’utilisation Câble d’alimentation Consignes de sécurité et informations concernant la garantie Pupitre Assistance technique Pour les toutes dernières informations concernant la configuration système requise, la compatibilité, etc., et l’enregistrement du produit, veuillez visiter alesis.com. Pour de l’assistance supplémentaire, veuillez visiter alesis.com/support.
Caractéristiques Panneau supérieur 2 3 7 4 1 8 5 6 1. Interrupteur d'alimentation : Cette touche met le piano sous et hors tension. Afin d'économiser de l'énergie, le piano s'arrêtera automatiquement après 30 minutes d’inutilisation. 2. Master : Ce bouton permet d'ajuster le niveau du volume de la sortie ligne et de la sortie casque.
Fonctionnement Chansons de démonstration Le piano numérique Recital 61 dispose de 2 chansons de démonstration. Pour faire jouer les chansons de démonstration : 1. Appuyez et relâchez simultanément les touches Split et Layer. Le piano numérique Recital 61 devrait passer au mode Demo et jouer les chansons de démonstration en boucle continue. Les DEL des deux touches devraient clignoter pendant la lecture des chansons de démonstration. 2.
Mode de superposition de voix Le mode Layer permet de superposer deux voix différentes afin d’obtenir un son plus riche. Pour activer le mode Layer : 1. Appuyez sur la touche Layer afin d'accéder au mode Layer. La DEL de la touche Layer deviendra verte. 2. Sélectionnez la voix principale en appuyant sur une des touches Voice afin de choisir entre la voix originale ou la variation. 3. Appuyez de nouveau sur la touche Layer. La DEL de la touche Layer deviendra rouge. 4.
Mode Advanced Function Vous pouvez modifier de nombreuses fonctions du Recital 61 à partir du mode Advanced Function. Pour accéder au mode Advanced Function, appuyez simultanément sur les touches Metronome et Lesson. Les DEL des deux touches devraient s’allumer. Utilisez ensuite les touches correspondant au réglage souhaité (comme illustré ci-dessous). Vous trouverez de plus de renseignements sur les paramètres réglables dans les pages suivantes de ce guide.
Volume des voix Vous pouvez régler le volume de chaque voix superposée à partir du mode Layer et la voix du point de séparation à partir du mode Split. Pour modifier le volume de la voix principale en Mode Layer : 1. Appuyez simultanément sur les touches Metronome et Lesson afin d’accéder au mode Advanced Function. Les DEL des deux touches devraient s’allumer. 2. Utilisez les touches Upper Volume 1-2-3 du clavier pour modifier le volume. 1 étant le réglage le plus faible, et 3 le plus élevé. 3.
Sensibilité au touché Le piano numérique Recital 61 dispose de la fonction de réponse au toucher afin de contrôler le niveau de la voix selon la dynamique, comme sur un piano acoustique. Cela signifie que plus vous frappez fort sur les touches du clavier, plus le volume des haut-parleurs est élevé. Désactiver cette fonction résulte en une réponse au toucher fixe, peu importe la force de frappe. Les réglages de réponse au toucher sont Off (désactivé), 1, 2 et 3. Pour régler la sensibilité au toucher : 1.
Métronome La fonction de métronome fournit un battement régulier afin de vous permet de maintenir le tempo. Pour activer ou désactiver le métronome, cliquez sur la touche Metronome. Lorsque le métronome est activé, la DEL de la touche Metronome clignote au rythme du tempo sélectionné. Le tempo du métronome peut être réglé de 30 à 280 battements par minute. Pour régler le tempo du métronome : 1. Appuyez simultanément sur les touches Metronome et Lesson afin d’accéder au mode Advanced Function.
Effets Le Recital 61 vous permet d’ajouter un effet de réverbération et/ou de chœur qui peut être réglé selon votre son. Pour activer les effets : 1. Appuyez une fois sur la touche Reverb/Chorus pour activer l’effet de réverbération. La DEL de la touche devient verte lorsque l’effet de réverbération est activé. 2. Appuyez de nouveau sur la touche Reverb/Chorus pour désactiver l’effet de réverbération et activer l’effet de chœur. La DEL de la touche devient rouge lorsque l’effet de chœur est activé. 3.
Résonance de pédale La résonance de pédale est une fonction qui simule la réverbération des notes lorsque la pédale de sustain est enfoncée sur un piano acoustique. Lorsque la fonction de résonance de pédale est activée, la pédale de sustain permet au Recital 61 de reproduire les sons harmoniques riches et caractéristiques uniques d'un piano acoustique. Pour activer ou désactiver la fonction de résonance de pédale : 1.
Réinitialisation des paramètres par défaut Pour réinitialiser les paramètres par défaut du Recital 61, il suffit de maintenir les touches Layer et Lesson enfoncées lors de sa mise sous tension. Tous les paramètres seront réinitialisés à leurs valeurs par défaut. Remarque : Le Recital 61 ne doit pas être en mode Advanced Function lorsque vous réinitialisez les paramètres d'usine.
Guida per l'uso (Italiano) Introduzione Contenuti della confezione Pianoforte digitale Recital 61 Guida per l'uso Adattatore di alimentazione Istruzioni di sicurezza e garanzia Leggio Assistenza Per le ultime informazioni in merito a questo prodotto (requisiti di sistema, informazioni sulla compatibilità, ecc.) e per la registrazione del prodotto, recarsi alla pagina alesis.com. Per ulteriore assistenza sul prodotto, recarsi alla pagina alesis.com/support.
Caratteristiche Pannello superiore 2 3 7 4 1 8 5 6 1. Interruttore di alimentazione: accende e spegne il pianoforte. Per risparmiare energia, il pianoforte si spegnerà automaticamente dopo 30 minuti in caso di inattività. 2. Manopola volume master: regola il volume master per l'uscita di linea e per l'uscita cuffie.
Operazione Canzoni Demo Riproduzione di canzoni Demo Il pianoforte digitale Recital 61 presenta 2 canzoni demo. Per riprodurle: 1. Premere e rilasciare i tasti Split e Layer contemporaneamente. Il pianoforte digitale Recital 61 entrerà in modalità Demo e riprodurrà le canzoni demo in un loop continuo. Durante la riproduzione della demo i LED dei due tasti lampeggiano. 2. Per uscire dalla modalità Demo, premere e rilasciare nuovamente i tasti Split e Layer contemporaneamente.
Modalità Layer Questa funzione consente la sovrapposizione di due voci diverse per ottenere un suono più ricco e pieno. Per attivare la modalità Layer: 1. Premere il tasto Layer per attivare la modalità Layer. Il LED del tasto Layer si illuminerà di verde. 2. Selezionare la prima voce premendo uno dei tasti Voice per scegliere tra la modalità Originale o Variazione. 3. Premere di nuovo il tasto Layer. Il LED del tasto Layer si illuminerà di rosso. 4.
Modalità funzioni avanzate Si possono modificare numerose funzioni del Recital 61 entrando in modalità funzionamento avanzata. Per entrare in modalità funzionamento avanzata, premere contemporaneamente i tasti Metronome e Lesson. I LED dei due tasti saranno accesi. Utilizzare quindi i tasti corrispondenti alle impostazioni desiderate (come indicato qui di seguito). Maggiori dettagli sulle impostazioni regolabili possono essere trovati nelle prossime pagine di questa guida per l’uso.
Volume delle voci Si può impostare il volume di ciascuna voce in modalità layer e la voce split (di divisione) in modalità Split. Per modificare il volume della voce superiore in modalità Layer: 1. Premere contemporaneamente i tasti Metronome e Lesson per entrare in modalità funzioni avanzate (Advanced Function). I LED dei due tasti si accenderanno. 2. Servirsi dei tasti Upper Volume 1-2-3 per modificare il volume. 1 è il volume più basso e 5 è il volume più alto. 3.
Sensibilità tattile Il pianoforte digitale Recital 61 è dotato di una risposta tattile per controllare il livello della voce con la forza con cui viene suonato - proprio come accade con un pianoforte acustico. Ciò significa che più forte vengono suonati i tasti, maggiore volume proviene dagli altoparlanti. Lo spegnimento di questa funzione porta a una risposta di tocco fissa, indipendentemente da quanto forte o piano vengono suonati i tasti. Vi sono 3 impostazione di tocco: Off, 1, 2 e 3.
Metronomo La funzione di metronomo garantisce un battito costante per aiutare a fare esercizio con un tempo costante. Per accendere o spegnere il metronomo, premere il tasto Metronome. Quando il metronomo è in uso, il LED del tasto Metronome lampeggerà a tempo. Il tempo del metronomo può essere regolato liberamente da 30 a 280 battiti al minuto. Per impostare il tempo del metronomo: 1. Premere contemporaneamente i tasti Metronome e Lesson per entrare in modalità funzioni avanzate (Advanced Function).
Effetti Con il Recital 61 potrete aggiungere effetti regolabili di riverbero e/o chorus al vostro suono. Per attivare gli effetti: 1. Premere il tasto Reverb/Chorus una volta per attivare l’effetto di riverbero. Il LED corrispondente si illuminerà di verde solo quando l’effetto riverbero sarà attivo. 2. Premere di nuovo il tasto Reverb/Chorus per disattivare l’effetto di riverbero e attivare l’effetto chorus. Il LED corrispondente si illuminerà di rosso solo quando l’effetto chorus sarà attivo. 3.
Risonanza del pedale La risonanza del pedale è una funzione che simula il riverbero delle note quando viene premuto il pedale sustain su un vero pianoforte. Con la risonanza del pedale attivata, il Recital 61 riproduce la ricca armonica e le caratteristiche di suono uniche di un vero pianoforte quando viene utilizzato un pedale sustain. Per accendere o spegnere la risonanza del pedale: 1. Premere contemporaneamente i tasti Metronome e Lesson per entrare in modalità funzioni avanzate (Advanced Function).
Ripristino dei valori predefiniti di fabbrica Per riportare il Recital 61 alle configurazioni predefinite di fabbrica, tenere premuti i tasti Layer e Lesson mentre si accende il pianoforte digitale Recital 61. Tutte le impostazioni saranno riportate ai loro valori predefiniti. Nota bene: il Recital 61 non può essere in modalità di funzionamento avanzato quando vengono ripristinate le impostazioni predefinite di fabbrica.
Benutzerhandbuch (Deutsch) Einführung Lieferumfang Recital 61 Digitalpiano Benutzerhandbuch Netzteil Sicherheitshinweise und Garantieinformationen Notenständer Kundendienst Für die neuesten Informationen zu diesem Produkt (Systemanforderungen, Informationen zur Kompatibilität etc.) und für die Produktregistrierung besuchen Sie alesis.com. Für zusätzlichen Produkt-Support besuchen Sie alesis.com/support.
Funktionen Oberseite 2 3 7 4 1 8 5 6 1. Netzschalter: Schaltet die Stromversorgung des Pianos ein bzw. aus. Um Energie zu sparen, wird das Piano sich automatisch nach 30 Minuten abschalten, wenn es nicht verwendet wird. 2. Gesamtlautstärkeregler: Stellt die Gesamtlautstärke für den Line- und Kopfhörerausgang ein.
Betrieb Demo-Songs Wiedergabe von Demo-Songs Das Recital 61-Digitalpiano verfügt über 2 Demo-Songs. Um die Demo-Songs abzuspielen: 1. Drücken Sie gleichzeitig die Split und Layer-Tasten. Das Recital 61-Digitalpiano wird in den DemoModus wechseln und die Demo-Songs in einer Endlosschleife spielen. Die beiden Tasten-LEDs werden während der Demo-Wiedergabe blinken. 2. Um den Demo-Modus zu verlassen, drücken Sie erneut die Split und Layer-Tasten zur gleichen Zeit.
Layer-Modus Im Layer-Modus können zwei verschiedene Voices für einen volleren Klang übereinander geschichtet werden. Um den Layer-Modus zu aktivieren: 1. Drücken Sie die Layer-Taste, um in den Layer-Modus zu gelangen. Die Layer-Tasten-LED wird grün leuchten. 2. Wählen Sie die erste Stimme, indem Sie eine der Voice-Tasten drücken, um zwischen der Originaloder der Variation-Stimme zu wählen. 3. Drücken Sie die Layer-Taste erneut. Die Layer-Tasten-LED wird rot leuchten. 4.
Erweiterte Funktionen Modus Sie können viele Funktionen in Recital 61 bearbeiten, indem Sie in den erweiterten Funktionsmodus wechseln. Drücken Sie die Tasten Metronome und Lesson gleichzeitig, um zum Erweiterte Funktionen Modus zu wechseln. Die beiden Tasten-LEDs werden leuchten. Verwenden Sie dann die Tasten, die der gewünschten Einstellung entsprechen (siehe Abbildung unten). Weitere Einzelheiten zu den anpassbaren Einstellungen finden Sie auf den nächsten Seiten dieser Bedienungsanleitung.
Voice-Pegel Sie können die Lautstärke für jede Stimme im Layer-Modus und die der Split-Voice im Split-Modus einstellen. So ändern den Pegel der oberen Voice im Layer-Modus: 1. Drücken Sie die Metronome-Taste und die Lesson-Tasten gleichzeitig, um zum „Erweiterte Funktionen“ Modus zu wechseln. Die beiden Tasten-LEDs werden leuchten. 2. Verwenden Sie die Tasten mit der Aufschrift Upper Volume 1-2-3, um den Pegel zu ändern. 1 ist der niedrigste Pegel und 3 ist der höchste Pegel. 3.
Berührungsempfindlichkeit Das Recital 61-Digitalpiano ist anschlagdynamisch, damit Sie die Lautstärke der Voice mit Ihrer Spielstärke steuern können - genau wie ein akustisches Klavier. Das bedeutet: je stärker Sie die Tasten anschlagen, desto lauter ist der Ton aus den Lautsprechern. Wenn diese Funktion ausgeschaltet wird, wird eine fixe Anschlagdynamik verwendet, egal wie stark oder sanft die Tasten angeschlagen werden. Es gibt 3 TouchEinstellungen: Off (Aus), 1, 2 und 3.
Metronom Die Metronom-Funktion bietet einen konstanten Rhythmus, um beim Üben bei gleichbleibender Geschwindigkeit zu helfen. Um das Metronom ein- oder auszuschalten, drücken Sie die Metronome-Taste. Wenn das Metronom im Einsatz ist, blinkt die Metronome-Tasten-LED im Takt des aktuellen Tempos. Das Tempo des Metronoms kann frei von 30-280 Schläge pro Minute (BPM) eingestellt werden. So stellen Sie das Metronom-Tempo ein: 1.
Effekte Mit Recital 61 können Sie Ihrem Sound einstellbare Hall (Reverb)- und / oder Chorus-Effekte hinzufügen. So aktivieren Sie die Effekte: 1. Drücken Sie die Reverb/Chorus -Taste einmal, um den Reverb-Effekt einzuschalten. Die Tasten-LED leuchtet grün, wenn nur der Reverb-Effekt aktiviert ist. 2. Drücken Sie die Reverb/Chorus -Taste erneut, um den Reverb-Effekt auszuschalten und den ChorusEffekt einzuschalten. Die Tasten-LED leuchtet rot, wenn nur der Chorus-Effekt aktiviert ist. 3.
Pedalresonanz Pedalresonanz ist eine Funktion, die den Nachhall der Noten beim Betätigen des Haltepedals auf einem echten Klavier simuliert. Ist die Pedal Resonance aktiviert, reproduziert Recital 61 die reichen Harmonien und einzigartigen Klangeigenschaften eines echten Klaviers mit gehaltenem Sustain-Pedal. Um die Pedalresonanz ein- oder auszuschalten: 1. Drücken Sie die Metronome-Taste und die Lesson-Tasten gleichzeitig, um zum „Erweiterte Funktionen“ Modus zu wechseln.
Werkseinstellungen wiederherstellen Um die Werkseinstellungen des Recital 61 wiederherzustellen, halten Sie die Tasten Layer und Lesson gedrückt und schalten das Recital 61 Digitalpiano ein. Alle Einstellungen werden auf ihre Standardwerte zurückgesetzt. Hinweis: Recital 61 kann nicht im erweiterten Funktionsmodus sein, wenn Sie die werkseitigen Standardeinstellungen wiederherstellen.
Appendix (English) Technical Specifications Keyboard 61 semi-weighted keys with velocity sensitivity Polyphony 128 voices Sounds 10 Demos 2 piano demo songs 10 tone/voice demo songs Metronome Tempo Range 30–280 BPM Speakers (2) 10 W woofers (2) 20 W tweeters Power 12V DC, 2A (center positive) power supply or 6 “AA” batteries Dimensions 11.5” x 3.5” x 35.6” (width x depth x height) 29.2 x 8.9 x 90.4 cm Weight 14.3 lbs. 6.5 kg Specifications are subject to change without notice.
alesis.com Manual Version 1.