QUICKSTART MANUAL ENGLISH (1 – 14) GUÍA DE INICIO RÁPIDO ESPAÑOL (15 – 28) GUIDE D'UTILISATION RAPIDE FRANÇAIS (29 – 42) KURZANLEITUNG DEUTSCH (43 – 56) GUIDA RAPIDA ITALIANO (57 – 70)
QUICKSTART GUIDE BOX CONTENTS Please make sure the following items can be located in the box: SR18 Power Adapter (12V DC 600mA) Quickstart Manual Reference Manual Safety and Warranty Information READ THE SAFETY AND WARRANTY INFORMATION BOOKLET BEFORE USING THIS PRODUCT! CONNECTION DIAGRAM As you hook up the SR18, the volume control on your power amp and the SR18 should be all the way down, and power to both units should be off. 1. 2. 3. 4. 5. 6. 7. 8.
INTRODUCTION TO THE SR18 Welcome to the SR18 Professional Drum Machine. The SR18 allows you to quickly and easily program drum, percussion and bass sounds into rhythm Patterns and to turn these Patterns into Songs. Let’s begin with a quick explanation of some of the key elements: PATTERNS VS. SONGS PATTERNS – When recording with a drum machine, it's often easier to divide a song into shorter individual Patterns and work on these rather than record an entire song.
OVERVIEW OF THE CONTROLS Now that we have introduced you to the infrastructure of the SR18, let’s dive in and take a closer look at some of the controls. GENERAL CONTROLS: 1. LCD – The display helps you keep track of system parameters and settings as you use the SR18. 2. PADS – The 12 pads are used to trigger sounds on the SR18. The pads can address 3 different types of sounds: drums, percussion and bass.
. TEMPO LED – This LED will blink at a rate equal to the tempo displayed on the screen’s bottom right corner. 7. REC LED – This LED will light when the SR18 is recording. It will blink when you are required to confirm or cancel an action. 8. A & B – Each Pattern consists of two Main sub-patterns – A & B. You can select each of the two sub-patterns by pressing its corresponding button. These sub-patterns allow you to program variation in your Patterns (i.e.
MODE BUTTONS: 17. PATTERN / SONG – This button toggles between the two different modes on the SR18. In Pattern Mode, you can play, record and edit individual patterns. Patterns are short (i.e. 8-beat, 16-beat, etc) rhythm sequences which are assembled together to create Songs. A Song is a sequence of Patterns. In Song Mode, you can perform or program your Patterns to create a Song. The currently-selected mode will be indicated on the display. 18.
PLAYING PATTERNS STEP 1 If the display’s upper right window shows SONG, press the PATTERN / SONG button once to select Pattern Mode. STEP 2 If the display’s upper right window shows USER, press the PRESET / USER button once until USER disappears; this selects the Preset patterns. STEP 3 Press the INC / DEC buttons or use the VALUE dial to select a Pattern. You can also enter a Pattern number (00-99) with the number buttons. Use a “leading zero” (i.e. 01, 02, 03) for the first nine Patterns.
PLAYING FILLS STEP 1 Begin by selecting a Pattern and pressing PLAY. STEP 2 Press and release the FILL button while the main A Pattern is playing. You’ll hear a drum fill that leads right into the associated B Pattern. STEP 3 Press the FILL button again. A different fill will transition from the B Pattern back into the A Pattern. STEP 4 Fills do not always have to be transitional Patterns. Suppose an A Pattern is playing.
RECORDING YOUR OWN PATTERNS STEP 1 If the display’s upper right window shows SONG, press the PATTERN / SONG button once to select Pattern Mode (PATTERN will be displayed). STEP 2 If the display’s upper right window does not show USER, press the PRESET / USER button once to select User Patterns (USER will be displayed in the upper right corner). STEP 3 Press the INC / DEC buttons or use the VALUE dial or number buttons to select an empty Pattern. If the Pattern is empty, the display will read EMPTY PATT.
STEP 9 You will hear a metronome sound and the top line of the screen will display the Pattern’s current Beat Number. Play the pads to the beat. As the Pattern loops, you can add more layers until you are satisfied. Note that the Quantization and Swing settings will affect how your pattern is recorded. STEP 10 You can layer sounds from any of the three categories (Drums, Percussion, Bass) by pressing the corresponding button (DRUMS, PERC, BASS) and then playing out a sequence on the pads.
LOADING AND CREATING DRUM SETS The SR18 has 100 Preset and 100 Editable Drum Sets (groups of sounds). After pressing the DRUM SET button, you can use the INC / DEC buttons, the VALUE dial, or the number buttons to select a different set (each set can have its own sounds, tuning, volume, panning, etc). You may also edit individual pad sounds within each kit. In addition, you may also choose different Bass sounds for each kit. STEP 1 Press the DRUM SET button to bring up the Drum Set Menu.
STEP 7 Note that Drums and Percussion sounds are grouped in each Drum Set. This means that changing the drum sounds to a different set on page 1 of the Drum Set menu will cause the Percussion sounds to change as well (although individual pad sounds may be replaced freely once a Drum Set has been loaded). You can, however, independently choose a different set of Bass sounds for the selected set.
CREATING AND ERASING SONGS The SR18 can remember the order in which you selected Patterns, which variations were selected, and when you selected fills. Recording this information in SR18’s Song Mode creates a complete Song. Begin with the SR18 stopped. STEP 1 Select Song Mode by pressing the PATTERN / SONG button so the display says SONG. STEP 2 The display should say EMPTY SONG. If not, press the INC / DEC buttons (or use the VALUE dial) to select an empty song.
STEP 6 Once you have finished creating the sequence of Patterns for your Song, press the STOP button to stop the recording. STEP 7 You will see the screen displayed on the right. The top line will indicate the last step of the Song (STEP 48 in this example) and the bottom line will say END. To move between the steps, use the PAGE UP / DOWN buttons. Each step of the sequence will show the Pattern associated with it.
FOOTSWITCH CONTROL Now that we have the basics down, let's investigate some live performance options using footswitch control. This is particularly useful if you're playing along with Patterns and Songs on the pads and can't use your hands to punch buttons. There are two jacks for footswitches (Start/Stop and Count/A/B/Fill). Always plug these footswitches in before turning on power.
GUÍA DE INICIO RÁPIDO CONTENIDO DE LA CAJA Asegúrese de que la caja contenga los siguientes elementos: SR18 Adaptador de alimentación (12 V CC 600 mA) Manual de inicio rápido Manual de referencia Información sobre la seguridad y la garantía ¡LEA EL FOLLETO DE INFORMACIÓN SOBRE LA SEGURIDAD Y LA GARANTÍA ANTES DE USAR ESTE PRODUCTO! DIAGRAMA DE CONEXIÓN Cuando se conecta la SR18, el control de volumen de su amplificador de potencia y de la SR18 deben estar totalmente al mínimo y la alimentación de ambas
INTRODUCCIÓN A SR18 Bienvenido a la caja de ritmos profesional SR18. La SR18 le permite programar rápida y fácilmente sonidos de tambores, percusión y bajo en patrones de ritmo y convertir estos patrones en temas musicales. Comencemos por explicar rápidamente algunos de los elementos más importantes: PATRONES Y TEMAS MUSICALES PATRONES - Al grabar con una caja de ritmos, a menudo es más fácil dividir un tema en patrones individuales y trabajar sobre estos en vez de grabar toda el tema.
DESCRIPCIÓN GENERAL DE LOS CONTROLES Ahora que le hemos introducido en la infraestructura de la SR18, echemos un vistazo más detenido a algunos de los controles. CONTROLES GENERALES: 1. LCD – La pantalla le ayuda a mantener el seguimiento de los parámetros y valores de ajuste del sistema mientras usa la SR18. 2. PADS – Los 12 pads se usan para disparar sonidos en la SR18. Los pads pueden admitir 3 tipos de sonidos diferentes: tambores, percusión y bajo.
5. LED DE TEMPO – Este LED parpadea con una frecuencia igual al tempo mostrado en la esquina inferior derecha de la pantalla. 6. LED REC – Este LED se enciende cuando la SR18 está grabando. Parpadea cuando se le requiere que confirme o cancele una acción. 7. A y B – Cada patrón consiste en dos subpatrones principales – A y B. Puede seleccionar cada uno de los dos subpatrones pulsando su botón correspondiente. Estos subpatrones le permiten programar variaciones en sus patrones (por ej.
BOTONES DE MODO: 16. PATTERN / SONG – Este botón conmuta entre los dos modos diferentes de la SR18. En modo Pattern (Patrón), puede reproducir, grabar y editar patrones individuales. Los patrones son breves secuencias de ritmos (de 8 beats, 16 beats, etc.) que se ensamblan para crear temas musicales. Un tema es una secuencia de patrones. En modo Song (Tema) puede interpretar o programar sus patrones para crear un tema musical. El modo seleccionado se muestra en la pantalla. 17.
CÓMO REPRODUCIR PATRONES PASO 1 Si la ventana superior derecha de la pantalla muestra SONG (Tema), presione el botón PATTERN/SONG una vez para seleccionar el modo de patrón. PASO 2 Si la ventana superior derecha de la pantalla muestra USER (Usuario), pulse el botón PRESET / USER una vez hasta que desaparezca —de esta forma se seleccionan los patrones predeterminados. PASO 3 Pulse los botones INC / DEC o use el cuadrante VALUE para seleccionar un patrón.
CÓMO REPRODUCIR RELLENOS PASO 1 Comience seleccionando un patrón y pulse PLAY. PASO 2 Presione y suelte el botón FILL (relleno) mientras se está reproduciendo el patrón principal A. Escuchará un relleno de batería que conduce directamente al patrón B correspondiente. PASO 3 Presione el botón FILL otra vez. Un relleno diferente realizará la transición del patrón B de vuelta al patrón A. PASO 4 Los rellenos no tienen que siempre ser patrones de transición. Suponga que se está reproduciendo un patrón A.
CÓMO GRABAR SUS PROPIOS PATRONES PASO 1 Si la ventana superior derecha de la pantalla muestra SONG (Tema), presione el botón PATTERN/SONG una vez para seleccionar el modo de patrón (aparece PATTERN). PASO 2 Si en la ventana superior derecha de la pantalla no aparece USER, pulse el botón PRESET / USER una vez para seleccionar los patrones del usuario (aparece USER en la esquina superior derecha).
PASO 9 Escuchará un sonido de metrónomo y la línea superior de la pantalla mostrará el número de beat actual del patrón. Toque los pads de acuerdo al beat. A medida que se produce el loop del patrón, puede agregar más capas hasta que esté satisfecho. Tenga en cuenta que los valores de cuantización y swing afectan a la forma en que se graba su patrón.
CÓMO CARGAR Y CREAR CONFIGURACIONES DE BATERÍA La SR18 cuenta con 100 configuraciones de batería (grupo de sonidos) predeterminados y 100 editables. Después de pulsar el botón DRUM SET, puede usar los botones INC / DEC, el cuadrante VALUE o los botones de números para seleccionar una configuración diferente (cada configuración puede tener sus propios sonidos, afinación, volumen, panning, etc). Puede editar también sonidos de pads individuales dentro de cada kit.
PASO 7 Tome nota de que los sonidos de tambores y percusión se agrupan en cada configuración de batería. Esto significa que cambiar los sonidos de tambores a un conjunto diferente en la página 1 del menú Drum Set causa que los sonidos de percusión cambien también (si bien los sonidos de pads individuales se pueden reemplazar libremente una vez cargada una configuración de batería). Es posible, sin embargo, elegir un conjunto diferente de sonidos de bajo para la configuración seleccionada.
CÓMO CREAR Y BORRAR TEMAS La SR18 puede recordar el orden en que el usuario seleccionó los patrones, qué variaciones fueron seleccionadas y cuándo se seleccionaron los rellenos. Al grabarse esta información en el modo de canción de SR18, se crea un tema completo. Comience con la SR18 detenida. PASO 1 Seleccione el modo de tema pulsando el botón PATTERN / SONG de modo que la pantalla indique SONG. PASO 2 La pantalla debe indicar EMPTY SONG (Tema vacío).
PASO 6 Una vez que termine de crear la secuencia de patrones de su tema, pulse el botón STOP para detener la grabación. PASO 7 Verá la pantalla ilustrada a la derecha. La línea superior indica el último paso del tema (STEP 48 en este ejemplo) y la línea inferior indicará END (Fin). Para desplazarse entre los pasos, use los botones PAGE hacia arriba y abajo. Cada paso de la secuencia muestra el patrón asociado con el mismo.
CONTROL CON PEDALES Ahora que conocemos los puntos básicos, veamos algunas opciones de espectáculo en vivo usando el control del interruptor de pedal. Esto es especialmente útil si está tocando con patrones y canciones en los pads y no puede usar las manos para presionar los botones. Hay dos conectores para los interruptores de pedal (Start/Stop y Count/A/B/Fill). Siempre enchufe estos interruptores de pedal antes de conectar la alimentación.
GUIDE D’UTILISATION RAPIDE CONTENUE DE LA BOÎTE Assurez-vous que tous les articles énumérés ci-dessous se retrouvent dans la boîte : SR18 Bloc d’alimentation (12 V CA 600 mA) Guide d'utilisation simplifié Guide de référence Consignes de sécurité et information sur la garantie AVANT D'UTILISER CE PRODUIT, VEUILLEZ LIRE LES CONSIGNES DE SÉCURITÉ ET L'INFORMATION CONCERNANT LA GARANTIE.
INTRODUCTION AU SR18 Voici la boîte à rythmes professionnelle SR18. La SR18 vous permet de programmer rapidement et facilement des sons de batterie, percussion et de grosse caisse dans enchaînements rythmiques puis de tourner ces enchaînements en chansons.
SURVOL DES COMMANDES Maintenant que nous vous avons présenté l’infrastructure du SR18, nous regarderons les commandes de plus près. COMMANDES PRINCIPALES : 1. ACL – L’écran d’affichage vous permet de garder un oeil sur les paramètres et les réglages du système du SR18. 2. PADS – Les 12 pads sont utilisés pour déclencher les sons du SR18. Les pads peuvent déclencher 3 types de son différents : batterie, percussion et grosse caisse.
5. TAP TEMPO – Vous pouvez utiliser cette touche pour taper un tempo. Le SR18 estime le temps entre chaque tape et reproduit un rythme. Vous pouvez également modifier le tempo en maintenant la touche TAP TEMPO enfoncée et en utilisant la molette VALUE ou les touches INC/DEC. 6. TEMPO LED – Cette DEL clignote au rythme du tempo qui apparaît dans le coin inférieur droit de l’écran. 7.
TOUCHES DE NAVIGATION : 13. INC/DEC – Ces touches permettent d’augmenter ou de diminuer les valeurs et les réglages du SR18. 14. VALUE DIAL – Cette molette permet également d’augmenter ou de diminuer les valeurs et les réglages. 15. TOUCHES NUMÉROTÉES – Vous pouvez également utiliser ces touches afin d’entrer les valeurs. 16. PAGE HAUT/BAS – Ces deux touches permettent de passer d’une page à l’autre du menu des options. TOUCHES DES MODES : 17.
TOUCHES DE DÉFILEMENT : 25. PLAY - If the SR18 is stopped, pressing PLAY will play the sequence from the current position. Si le SR18 est en cours de lecture et que la touche PLAY est enfoncée, la séquence sera pausée. Pour retourner au début de l’enchaînement encours (ou étape en cours si vous êtes en mode Song) appuyez sur les touches PAGE DOWN. Pour aller au début de l’enchaînement suivant (ou l’étape suivante si vous êtes en mode Song) appuyez sur les touches PAGE HAUT. 26.
UTILISATION DE SÉQUENCES D’ENCHAÎNEMENTS ÉTAPE 1 Commencez par sélectionner un enchaînement et en appuyant ensuite sur la touche PLAY. ÉTAPE 2 Si un enchaînement A joue, appuyez sur la touche B (ou A si c’est un enchaînement B qui joue). L’enchaînement d’alternance commence à jouer aussitôt que l’enchaînement en cours se termine. ÉTAPE 3 Vous pouvez également faire appel à un numéro d’enchaînement différent lorsque le SR18 joue.
ÉTAPE 3 Frappez un autre pad. L'enchaînement assigné au pad commencera à jouer dès que l’enchaînement précédent tire à sa fin. ÉTAPE 4 Pour modifier l’enchaînement assigné à un pad, appuyez sur la touche PAGE HAUT. Appuyez sur le pad que vous désirez modifier. Maintenant, utilisez la molette VALUE, les touches INC/DEC ou les touches numérotées pour sélectionner un enchaînement qui sera déclenché par le pad. Vous pouvez également spécifier A, B ou FILL pour enchaînement sélectionné.
ÉTAPE 5 Sur la page 1 (indiqué dans le coin inférieur droit de l’écran) du menu de configuration d’enregistrement (Record Setup), vous pouvez sélectionner l’intervalle de quantification à l’aide des touches INC/DEC ou de la molette VALUE. La quantification modifie le son au rythme spécifié lorsque vous jouez, alors il est préférable de choisir la valeur désirée avant d'essayer vos rythmes. Sélectionnez des réglages de quantification plus élevés pour un son plus précis et plus complexe rythmiquement.
ÉTAPE 12 Une fois satisfait avec l’enchaînement que vous avez enregistré, appuyez sur la touche STOP afin de faire arrêter l’enregistrement. ÉTAPE 13 Pour écouter l’enchaînement, appuyez sur la touche PLAY. ÉTAPE 14 Pour enregistrer d’autres enchaînements, sélectionnez un autre enchaînement à l’aide des touches INC/DEC ou de la molette VALUE, et répétez la procédure ci-dessus.
ÉTAPE 3 Frappez les pads pour faire l’écoute des sons de l’ensemble. Pour modifier le son assigné à un pad, appuyez sur la touche PAGE HAUT (page 2). Appuyez sur le pad pour accéder à ses propriétés. Le numéro du pad sera affiché dans le coin supérieur droit de la fenêtre (8 dans cet exemple), le nom du son assigné au pad sera affiché sur la première ligne (CowBell5 dans cet exemple) et le numéro du son sera affiché sur la dernière ligne (252 dans cet exemple).
ÉTAPE 9 Lorsque vous êtes satisfait de l'ensemble de sonorité de batterie, vous devez le sauvegarder. Autrement, vos réglages seront supprimés lorsque l’appareil sera mis hors tension. Pour sauvegarder l’ensemble, appuyez sur la touche SAVE. Tout en maintenant la touche SAVE enfoncée, utilisez les touches INC/DEC, la molette VALUE ou les touches numérotées afin de sélectionner un emplacement pour sauvegarder votre ensemble de sonorité de batterie.
ÉTAPE 5 Pour sélectionner l’enchaînement suivant, utilisez les touches INC/DEC. Vous pouvez également utiliser la molette VALUE ou entrer un numéro d’enchaînement à l’aide des touches numérotées. N’oubliez pas d’ajouter un zéro à gauche pour les enchaînements 0 à 9 (p. ex. 00, 05, 09, etc.). L’écran affichera NEXT et le numéro d’enchaînement inscrit s’affichera sur la dernière ligne. L’enchaînement commence à jouer aussitôt que l’enchaînement en cours se termine.
RÉGLAGE DE L'INTERRUPTEUR AU PIED Maintenant que nous connaissons les fonctions de base, passons aux options de réglage de l'interrupteur au pied pour les performances en direct. Ceci est particulièrement utile lorsque vous vous accompagniez d'enchaînements et de chansons en utilisant les pads et que vous ne pouvez vous servir de vos mains pour appuyer sur les touches. Il y a deux prises pour les interrupteurs au pied (Marche/Arrêt (Start/Stop) et Comptage/A/B/Remplissage (Count/A/B/Fill)).
AUFBAUANLEITUNG INHALT DER VERPACKUNG Überprüfen Sie bitte, dass folgende Bestandteile in der Verpackung enthalten sind: SR18 Netzteil (12V DC 600mA) Kurzanleitung Bedienungsanleitung Sicherheits- und Garantieinformationen BITTE LESEN SIE DIE SICHERHEITS- UND GARANTIEINFORMATIONEN VOR DER VERWENDUNG DES PRODUKTS! ANSCHLUSSÜBERSICHT Beim Anschluss der SR18 sollten der Lautstärkeregler des Verstärkers und der SR18 zugedreht sein. Beide Geräte sollten ausgeschaltet sein. 1. 2. 3. 4. 5. 6. 7. 8.
EINFÜHRUNG ZUR SR18 Willkommen zur SR18 Professional Drum Machine. Die SR18 ermöglicht es Ihnen, auf einfache Weise Drum-, Percussion- und Bass-Sounds zu einem rhythmischen Pattern zusammenzufügen. Patterns lassen sich wiederum zu ganzen Songs kombinieren.
ÜBERBLICK ÜBER DIE BEDIENELEMENTE Nun, da wir die Grundfunktionen der SR18 kennen gelernt haben, SR18, sollten wir uns die Bedienelemente des Gerätes genauer ansehen. ALLGEMEINE BEDIENELEMENTE: 1. LCD – Das Display hilft Ihnen bei der Arbeit und zeigt Systemparameter und Einstellungen der SR18 an. 2. PADS –12 Pads werden bei der SR18 zum Triggern von Sounds verwendet. Die Pads können 3 verschiedene Soundarten ansprechen: Drums, Percussion und Bass.
7. 8. 9. 10. 11. REC LED – Wenn diese LED leuchtet, nimmt die SR18 auf. Die LED blinkt, wenn ein Vorgang eine Bestätigung benötigt oder abgebrochen werden soll. A & B – Jedes Pattern besteht aus 2 Main Sub-Patterns – A & B. Jedes dieser zwei Sub-Patterns lässt sich durch drücken der jeweiligen dazugehörigen Taste auswählen. Dank dieser Sub-Patterns können Sie Variationen in Ihre Pattern programmieren (z.B. Sub-Pattern A ist die Strophe, Sub-Pattern B der Refrain).
18. PRESET / USER – Diese Taste schaltet zwischen den Preset und User Patterns um. Der gewählte Modus wird in der oberen rechten Ecke des Displays angezeigt. In den Preset Patterns finden Sie zahlreiche Rock, Jazz Pop, sowie andere Rhythmen, die von professionellen Drummern programmiert wurden und nicht überschrieben oder editiert werden können. Damit Sie Preset Patterns bearbeiten können, müssen Sie es als User Pattern kopieren.
PATTERNS ABSPIELEN SCHRITT 1 Falls das Display in der oberen rechten Ecke SONG anzeigt, drücken Sie die PATTERN / SONG Taste einmal, um den Pattern Modus auszuwählen. SCHRITT 2 Wenn im rechten oberen Displaybereich USER angezeigt wird, drücken Sie PRESET / USER einmal, bis USER verschwindet; dadurch wählen Sie die Preset Patterns aus. SCHRITT 3 Wählen Sie mit den INC / DEC Tasten oder mit dem VALUE Rad ein Pattern aus. Sie können auch eine Pattern Nummer (00-99) mit dem Ziffernblock eingeben.
FILLS ABSPIELEN SCHRITT 1 Wählen Sie ein Pattern aus und drücken Sie PLAY. SCHRITT 2 Drücken Sie während der Wiedergabe des Main A Patterns die FILL Taste und lassen Sie sie los. Sie hören nun ein Drum Fill, welches dann zum dazugehörigen B Pattern führt. SCHRITT 3 Drücken Sie noch einmal die FILL Taste. Ein anderes Fill erklingt und leitet vom Main B Pattern zum A Pattern zurück. SCHRITT 4 Fills müssen nicht zwangsläufig zu anderen Patterns überleiten. Nehmen Sie an, ein A Pattern wird abgespielt.
AUFNAHME IHRER EIGENEN PATTERNS SCHRITT 1 Falls in der rechten oberen Seite des Displays SONG anzeigt, drücken Sie einmal die PATTERN / SONG Taste, um den Pattern Modus auszuwählen (PATTERN wird dann angezeigt). SCHRITT 2 Wenn in der rechten oberen Ecke des Displays nicht USER steht, drücken Sie einmal die PRESET / USER Taste. Dadurch wählen Sie ein User Pattern aus (USER wird in der oberen rechten Ecke des Displays angezeigt).
SCHRITT 9 Nun hören Sie einen Metronomsound und in der oberen Zeile des Displays sehen Sie die aktuelle Taktnummer des Patterns. Spielen Sie im Takt des Metronoms auf den Pads. Wenn das Pattern wieder von Beginn loopt, können Sie nach und nach weitere Instrumente durch das Anschlagen der anderen Pads einspielen (Layering), bis Ihnen das Pattern gefällt. Beachten Sie, dass die Einstellungen für Quantisierung und Swing Einfluss darauf haben, wie Ihr Pattern aufgenommen wird.
DRUM SETS LADEN UND ERZEUGEN In der SR18 befinden sich 100 Preset und 100 editierbare Drum Sets (Soundgruppen). Nachdem Sie mit der DRUM SET Taste in den Drum Set Modus gewechselt sind, haben Sie die Möglichkeit mit den INC / DEC Tasten, dem VALUE Rad oder dem Ziffernblock ein Drum Set auszuwählen. Jedes Set besteht aus bestimmten Sounds mit unterschiedlichen Einstellungen für Tonhöhe, Lautstärke, Panorama usw. Einzelne Pad Sounds innerhalb eines Kits lassen sich editieren.
SCHRITT 7 Beachten Sie dass Drums und Percussion Sounds in jedem Drum Set zusammengefasst sind. Das bedeutet, dass bei der Änderung der Drum Sounds zu einem anderen Set auf Seite 1 des Drum Set Menüs sich auch die Percussion Sounds ändern (auch wenn sich einzelne Pad Sounds nach dem Laden eines Drum Sets austauschen lassen). Sie können jedoch unabhängig ein anderes Set an Bass Sounds für das ausgewählte Drum Set verwenden.
SONGS ERZEUGEN UND LÖSCHEN Die SR18 ist in der Lage, sich die Reihenfolge der von Ihnen ausgewählten Patterns, der gewählten Variationen und die gewählten Fills zu merken. Die Aufnahme dieser Informationen im Song Modus der SR18 erzeugt einen kompletten Song. Beginnen wir bei gestoppter Wiedergabe. SCHRITT 1 Wechseln Sie mit der PATTERN / SONG Taste in den Song Modus. Im Display steht dann SONG. SCHRITT 2 Das Display sollte mit EMPTY SONG einen leeren Song anzeigen.
SCHRITT 6 Nachdem Sie Ihre Pattern Sequenz als Song aufgenommen haben, drücken Sie die STOP Taste, um die Song Aufnahme zu beenden. SCHRITT 7 Nun sehen Sie im Display die hier rechts dargestellte Anzeige. Die obere Zeile zeigt den letzten Step des Songs (STEP 48 in diesem Beispiel) an. In der unteren Zeile steht END. Um zwischen den Steps zu wechseln, nehmen Sie die PAGE AUF / AB Tasten. Jeder Step einer Sequenz zeigt das dazugehörige Pattern an.
STEUERUNG ÜBER FUßSCHALTER Nachdem wir jetzt die Grundlagen abgehakt haben, können wir uns ein paar Optionen für die Live Performance ansehen, bei denen sich Fußschalter einsetzen lassen. Gerade, wenn Sie zu Ihren Patterns und Songs dazu spielen möchten, und keine Hand zur Bedienung der Tasten frei haben, werden Sie die Fußschalteroptionen bald sehr zu schätzen wissen. Die SR18 besitzt zwei Fußschalter-Anschlüsse (Start/Stop und Count/A/B/Fill).
GUIDA RAPIDA CONTENUTI DELLA CONFEZIONE Assicurarsi che tutti gli elementi elencati di seguito si trovino nella confezione: SR18 Adattatore di alimentazione (12V CC 600mA) Manuale rapido Manuale di riferimento Istruzioni di sicurezza e garanzia PRIMA DI UTILIZZARE IL PRODOTTO, LEGGERE ATTENTAMENTE LE ISTRUZIONI DI SICUREZZA E LA GARANZIA! SCHEMA DEI COLLEGAMENTI Al momento di collegare l’SR18, volume dell’ampli di alimentazione e dell’SR18 stesso devono essere completamente abbassati e l’alimentazione d
INTRODUZIONE ALL’ SR18 Benvenuti alla Drum Machine Professionale SR18. L’SR18 permette di programmare rapidamente e con facilità suoni di batterie, percussioni e bassi in pattern ritmici e di trasformare tali pattern in canzoni. Cominciamo con una rapida spiegazione di alcuni degli elementi chiave: PATTERN VS. CANZONI PATTERN: quando si registra con una drum machine, è spesso più facile dividere una canzone in singoli Pattern più brevi e lavorare su questi ultimi piuttosto che registrare un’intera canzone.
PANORAMICA DEI COMANDI Ora che vi abbiamo introdotto all’infrastruttura dell’SR18, tuffiamoci più in profondità e osserviamo più da vicino alcuni dei comandi. COMANDI GENERALI: 1. LCD – Il display vi aiuta a tenere d’occhio i parametri e le impostazioni di sistema durante l’uso dell’SR18. 2. PAD – I 12 pad servono a produrre suoni sull’SR18. I pad possono indirizzarsi verso 3 tipi diversi di suono: batteria, percussioni e basso.
8. A & B – Ogni Pattern è composto da due sub-pattern principali: A & B. Si può selezionare ciascuno dei due sub-pattern premendo il pulsante corrispondente. Questi sub-pattern vi permettono di programmare variazioni a livello dei pattern (ad es. il sub-pattern A è la strofa, il sub-pattern B il ritornello). 9. FILL – Ogni pattern include inoltre due Fill associati a ciascuno dei due sub-pattern. I Fill servono per passare da un sub-pattern all’altro (cioè la transizione della strofa al ritornello). 10.
TASTI MODE (MODALITÀ) : 17. PATTERN / CANZONE (SONG) – Questo tasto commuta tra le due modalità sull’SR18. In modalità Pattern si possono suonare, registrare e modificare pattern singoli. I pattern sono brevi (cioè 8 battiti, 16 battiti, ecc.) sequenze ritmiche che vengono unite a creare canzoni. Una Canzone è una sequenza di Pattern. In modalità Song si possono eseguire o programmare i pattern per creare una canzone. La modalità attualmente selezionata verrà indicata sul display. 18.
RIPRODUZIONE DI PATTERN FASE 1 Se la finestra superiore destra del display mostra la scritta SONG, premere il tasto PATTERN / SONG una volta per selezionare la modalità Pattern. FASE 2 Se la finestra superiore destra del display mostra la scritta USER, premere il tasto PRESET / USER una volta fino a quando la scritta USER non scompare: così facendo vengono selezionati i pattern Preset. FASE 3 Premere i tasti INC / DEC o servirsi di VALUE per selezionare un pattern.
RIPRODUZIONE DI FILL FASE 1 Iniziare selezionando un Pattern e premendo PLAY. FASE 2 Premere e rilasciare il tasto FILL mentre il pattern A principale viene riprodotto. Si sentirà un fill di batteria che porta direttamente al pattern B associato. FASE 3 Premere nuovamente il tasto FILL. Un fill diverso transiterà dal pattern B tornando al pattern A. FASE 4 Non sempre i fill devono essere pattern di passaggio. Supponiamo che stia suonando un pattern A.
REGISTRAZIONE DI PATTERN PERSONALIZZATI FASE 1 Se la finestra superiore destra del display mostra SONG, premere una volta il tasto PATTERN / SONG per selezionare la modalità Pattern (PATTERN apparirà a display). FASE 2 Se la finestra superiore destra del display non mostra USER, premere una volta il tasto PRESET / USER per selezionare “User Patterns” (USER apparirà nell’angolo superiore destro). FASE 3 Premere i tasti INC / DEC o servirsi di VALUE o dei tasti numerici per selezionare un pattern vuoto.
FASE 9 Si sentirà il suono di un metronomo e la linea superiore dello schermo mostrerà il numero di battiti correnti del pattern. Suonare i pad al ritmo del beat. Mentre il pattern effettua il loop, è possibile aggiungere più strati fino ad essere soddisfatti. Va notato che le impostazioni di Quantizzazione e Swing influenzerà il modo in cui il pattern viene registrato.
CARICARE E CREARE DRUM SET L’SR18 è dotato di 100 Drum Set predefiniti (Preset) e di 100 Drum Set modificabili (gruppi di suoni). Dopo aver premuto il tasto DRUM SET, si possono utilizzare i tasti INC / DEC, la rotella VALUE o i tasti numerici per selezionare un set diverso (ogni set può avere i propri suoni, intonazioni, volume, panoramica, ecc.). Si possono inoltre modificare singoli suoni di pad all’interno di ciascun kit. Per ogni kit si possono poi scegliere diversi suoni di basso.
FASE 7 Va notato che i suoni di Batteria e Percussioni sono raggruppati in ciascun Drum Set. Ciò significa che modificando i suoni di batteria ad un set diverso a pagina 1 del menu Drum Set farà sì che i suoni delle Percussioni cambieranno a loro volta (nonostante suoni individuali di ogni pad possano essere sostituiti liberamente una volta caricato un Drum Set). Si può tuttavia scegliere indipendentemente un diverso set di suoni di basso per il set selezionato.
CREARE E CANCELLARE CANZONI L’SR18 è in grado di ricordare l'ordine in cui vengono selezionati i pattern, quali variazioni vengono selezionate e quando sono stati selezionati fill. La registrazione di queste informazioni nella modalità Song dell’SR18 crea una canzone completa. Iniziare con l’SR18 fermo. FASE 1 Selezionare la modalità Song premendo il tasto PATTERN / SONG fino a quando a display non appare la scritta SONG. FASE 2 A display deve apparire EMPTY SONG.
FASE 6 Una volta finito di creare la sequenza di pattern per la vostra canzone, premere il tasto STOP per interrompere la registrazione. FASE 7 Apparirà la schermata illustrata a sinistra. Da linea superiore indicherà l'ultimo intervallo della canzone (STEP 48 in questo esempio) e da linea inferiore dirà END. Per spostarsi lungo gli intervalli, servirsi dei tasti PAGE UP / DOWN. Ogni fase della sequenza mostrerà il pattern ad essa associato.
CONTROLLO INTERRUTTORE A PEDALE Ora che abbiamo delineato le cose fondamentali, analizziamo alcune opzioni per le esibizioni dal vivo servendosi del controllo tramite l'interruttore a pedale. Questo è soprattutto utile se si suona al ritmo di pattern e canzoni sui pad e non si possono utilizzare le mani per schiacciare i tasti. Sono presenti due jack deputati agli interruttori a pedale (Start/Stop e Count/A/B/Fill). Collegare sempre gli interruttori a pedale prima di accendere l'alimentazione.
7-51-0249-A
www.alesis.