Datasheet
1
volume
volume
m1
m1
m2
m2
pitch
pitch
xy
x y z
-
+
octave
octave
accomp
accomp
store
store
tap
tap
phrase
phrase
latch
latch
analog modeling synth
ana l o g m o d el i n g sy n t h
push
push
r
h
y
t
h
m
s
p
a
t
t
e
r
n
s
p
r
o
g
r
a
m
s
s
e
t
u
p
s
c
o
n
f
i
g
HOOKUP DIAGRAM
READ THE SAFETY & WARRANTY INFORMATION
BEFORE USING THIS PRODUCT!
Refer to the possible connection scenario for hooking up
the M1 Active 520 USB speakers.
AUDIO SETUP WITH YOUR COMPUTER
The M1Active 520 USB speakers are plug-and-play, so there is no
special driver installation necessary. Simply power on the speakers,
connect them to your computer’s USB port and all the necessary
drivers will be automatically installed. To enable your M1Active 520
USB speakers to send and receive audio to and from your computer,
follow the instructions below for your computer's operating system:
WINDOWS VISTA:
1. Go to Start Menu Control Panel Sound. (If you don’t see
Sound, select Switch to Classic View, and the Sound Control
Panel should become available.)
2. Click the Playback tab and select USB Audio Codec* as the
default device. (To enable recording through the M1Active 520
USB's 1/4" TRS INPUTS, click the Recording tab and select USB
Audio Codec* as the default device.**)
3. Click OK.
WINDOWS XP:
1. Go to Start Menu Control Panel Sounds and Audio Devices.
2. Click the Audio tab.
3. Under Sound Playback, select USB Audio Codec* as the default device. (To enable recording through the M1Active
520 USB's 1/4" TRS INPUTS, select USB Audio Codec* as the default Sound Recording device.**)
4. Click OK.
MAC:
1. Go to Applications Utilities Audio MIDI Setup.
2. In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Output. (To enable
recording through the M1Active 520 USB's 1/4" TRS INPUTS, select USB Audio Codec* as your Default Input.**)
3. Close the window.
BOX CONTENTS
y
M1Active 520 USB Speakers
y Power Cable
y USB Cable
y XLR Cable
y Quickstart Guide
y Safety & Warranty Information
* If you have other USB audio devices
connected to your computer, which may
have identical names, you may need to try
selecting each one until the M1Active 520
USB speakers are recognized.
COMPUTER
KEYBOARD OR
SOUND MODULE
POWER SOURCE
XLR CABLE
(INCLUDED)
** If you wish to record audio through the
M1Active 520 USB speakers, be sure your
audio software program is set up to receive
audio from them. This can usually be done
in your software’s "Preferences" or "Device
Setup." Please consult your software
manual for more information.