User Guide English ( 3 – 9 ) Guía del usuario Español ( 10 – 16 ) Guide d’utilisation Français ( 17 – 23 ) Guida per l’uso Italiano ( 24 – 30 ) Benutzerhandbuch Deutsch ( 31 – 37 ) Appendix English ( 38 )
User Guide (English) Introduction Support For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit alesis.com. For additional product support, visit alesis.com/support. Quick Start / Connection Diagram Setup and Playing Crash 2 Cymbal Pad* Tom 4 Drum Pad* * sold separately Computer* Smartphon e, MP3 player, etc.
Features Front Panel 1. Display: Shows the module's current settings and functions. 6 2 3 4 2. Song/Pattern: In Normal Mode, press this button 1 to enter the Song Menu, where you can select a song or adjust song-related settings. In Learning 8 7 5 Mode, press this button to enter the Pattern Menu, 9 13 14 11 where you can select a pattern (full kit plus 10 accompaniment) to play along to or adjust 15 12 pattern-related settings.
Rear Panel 1. Outputs: Use standard 1/4" TRS cables to connect these outputs to a speaker or amplifier system. The level of these outputs is controlled by the Volume knob. 2. Aux In: Use a standard 1/8" stereo cable to connect this input to an optional audio player (e.g,. MP3 player, CD player, etc.). This audio will be heard in the Outputs and Phones output. During recording, the audio from this input will not be recorded. 3.
Basic Functions Editing and Saving Drum Kits Important: • To edit and save your kits, you must be in Normal Mode. If the LED above the Song/Pattern button is not lit, press and hold Page/Select until it is. • Remember to save your kits after you have entered the settings you want! First, press Kit until NUM appears in the display. Use the < and > buttons to select your desired kit. Once you've selected your kit, you can edit its settings: To adjust the kit settings: 1.
Playing Along With Songs Important: To play songs, you must be in Normal Mode. If the LED above the Song/Pattern button is not lit, press and hold Page/Select until it is. To select and play a song: 1. Press Song until NUM appears in the display. 2. Use the < and > buttons to select the song. 3. Press Start/Stop to start playback. Note: During playback, the Pad Select buttons will light up to indicate which drums are playing. To disable/re-enable this feature, press the "Kick" Pad Select button.
Advanced Functions Adjusting Utility Settings The Utility settings let you further customize your pad settings and adjust the module's MIDI settings. To adjust the Utility settings: 1. Hit the pad whose settings you want to adjust, or press its corresponding Pad Select button. 2. Press Utility, then press Page/Select until the desired setting appears in the display: • SEN (Pad sensitivity): Controls how responsive a pad is when you hit it.
To record your performance with a Song: 1. Adjust the Song number (SNG) (as described in the To adjust the recording settings section below). 2. Start recording (as described in the To record section above). 3. To play the recording, press Play/Practice. Press it again to stop playback. To adjust the recording settings: 1. If the LED above the Song/Pattern button is not lit, press and hold Page/Select until it is. 2. Press Record. The button's LED will flash and the metronome will turn on automatically.
Guía del usuario (Español) Introducción Soporte Para obtener la información más completa acerca de este product (los requisitos del sistema, compatibilidad, etc) y registro del producto, visite alesis.com. Para soporte adicional del producto, visite alesis.com/support.
Características Panel frontal 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Pantalla: Muestra los parámetros y funciones actuales del módulo. Tema/Patrón: En modo normal, pulse este botón para 6 2 3 4 abrir el menú Song (Tema), en el que puede seleccionar 1 un tema o ajustar parámetros relacionados con el tema.
Panel superior 1. Salidas: Use cables estándar TRS de 1/4 pulg. para conectar estas salidas a un altavoz o sistema de amplificador. El nivel de estas salidas se controla con la perilla Volume. 7 5 6 4 3 1 2 2. Entrada auxiliar: Use un cable estéreo estándar de 1/8 pulg. para conectar esta entrada a un reproductor de audio opcional (como un reproductor de MP3, reproductor de CD, etc,). Este audio se oye en las salidas Output y Phones.
Funciones básicas Cómo editar y guardar los kits de batería Importante: • Para editar y guardar sus kits, debe estar en modo normal. Si el LED que está arriba del botón Song/Pattern no está encendido, mantenga pulsado Page/Select hasta que se encienda. • ¡Recuerde guardar sus kits después de ingresar los parámetros que desee! Pulse primero Kit hasta que aparezca NUM en la pantalla. Use los botones < y > para seleccionar el kit que desea.
Cómo tocar con temas de acompañamiento Importante: Para reproducir temas, debe estar en modo normal. Si el LED que está arriba del botón Song/Pattern no está encendido, mantenga pulsado Page/Select hasta que se encienda. Para seleccionar y reproducir un tema: 1. Pulse Song (Tema) hasta que aparezca NUM en la pantalla. 2. Use los botones < y > para seleccionar el tema. 3. Pulse Start/Stop para iniciar la reproducción.
Funciones avanzadas Cómo ajustar los parámetros de la utilidad Los parámetros Utility (Utilidad) le permiten personalizar más aún los parámetros de sus pads y ajustar los parámetros MIDI. Para ajustar los parámetros de la utilidad: 1. Toque el pad cuyos parámetros desea ajustar o pulse su botón Pad Select (Selección de pad) correspondiente. 2. Pulse Utility y luego Page/Select hasta que aparezca el parámetro deseado en la pantalla: 3.
Para grabar su interpretación con un tema: 1. Ajuste el número de tema (SNG) (como se explica en la sección Para ajustar los parámetros de grabación a continuación). 2. Comience a grabar (como se explica en la sección Para grabar precedente). 3. Para reproducir la grabación, pulse Play/Practice. Púlselo nuevamente para detener la reproducción. Para ajustar los parámetros de grabación: 1. Si el LED que está arriba del botón Song/Pattern no está encendido, mantenga pulsado Page/Select hasta que se encienda.
Guide d'utilisation (Français) Introduction Assistance Pour les dernières informations concernant ce produit (la configuration système minimale requise, la compatibilité, etc) et l’enregistrement du produit, veuillez visitez le site alesis.com. Pour de plus amples informations, visitez alesis.com/support.
Caractéristiques Panneau avant 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 18 Écran : Cet écran affiche tous les paramètres et les fonctions en cours du module. Touche Song/Pattern : En mode Normal, appuyez sur 6 2 3 4 cette touche afin d’accéder au menu Song, d’où vous 1 pouvez sélectionner une chanson, ou encore, modifier les 8 7 paramètres de la chanson.
Panneau supérieur 1. Sorties : Utilisez des câbles TRS 1/4 po (6,35 mm) standards afin de brancher ces sorties à un haut-parleur ou à un système de sonorisation. Le niveau de ces sorties est commandé par le bouton Volume. 7 5 6 4 3 1 2 2. Entrée Aux : Utilisez un câble 1/8 po (3,5 mm) standard afin de brancher cette entrée à un lecteur audio (lecteur MP3, lecteur CD, etc.). Ce signal audio sera transmis aux sorties Output et Phones.
Fonctions de base Modification et enregistrement des ensembles de sons de batterie Important : • Pour modifier et enregistrer vos ensembles, le module doit être en mode Normal. Si la DEL au-dessus de la touche Song/Pattern n’est pas allumée, enfoncez la touche Page/Select jusqu’à ce qu’elle s’allume. • N’oubliez pas d'enregistrer les ensembles si vous désirez conserver les modifications apportées. D’abord, appuyez sur la touche Kit jusqu’à ce que NUM s’affiche.
Utilisation de chansons d’accompagnement Important : Pour faire jouer des chansons, le module doit être en mode Normal. Si la DEL au-dessus de la touche Song/Pattern n’est pas allumée, enfoncez la touche Page/Select jusqu’à ce qu’elle s’allume. Remarque : Pendant la lecture, les touches de sélection s'allumeront à indiquer lesquelles batteries sonnent. Pour desactiver/activer cette fonction, appuyez la touche de sélection de grosse caisse. Pour sélectionner et faire jouer une chanson : 1.
Fonctions évoluées Réglage des paramètres utility Les paramètres Utility vous permettent de personnaliser encore plus les paramètres des pads et MIDI. Pour modifier les paramètres Utility : 1. Frappez maintenant le pad pour lequel vous désirez modifier les paramètres ou appuyez sur la touche de sélection correspondante. 2.
Enregistrement avec chanson d’accompagnement : 1. Réglez le numéro de la chanson (SNG) comme indiqué dans la section Pour modifier les paramètres d’enregistrement ci-dessous. 2. Lancez l’enregistrement comme indiqué dans la section Pour enregistrer précédente. 3. Pour faire la lecture de l’enregistrement, appuyez sur la touche Play/Practice. Appuyez de nouveau pour arrêter la lecture. Pour modifier les paramètres d’enregistrement : 1.
Guida per l'uso (Italiano) Introduzione Assistenza Per conoscere le ultime informazioni in merito a questo prodotto (i requisiti di sistema complete, compatibilità, ecc) e per la registrazione del prodotto, recarsi alla pagina alesis.com. Per ulteriore assistenza, recarsi alla pagina alesis.com/support.
Caratteristiche Pannello superiore 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Display: Mostra le attuali impostazioni e formazioni del modulo. Song/Pattern: In modalità normale, premere questo tasto 6 2 3 4 per entrare nel menu canzoni (Song), dove sarà possibile 1 scegliere una canzone o regolare configurazioni relative 8 7 5 alle canzoni.
Pannello anteriore 1. Uscite: Servirsi di cavi TRS standard da 1/4" per collegare queste uscite ad un altoparlante o a un impianto di amplificatori. Il livello di queste uscite è controllato dalla manopola Volume. 7 5 6 4 3 1 2 2. Ingresso Aux: Servirsi di un cavo stereo standard da 1/8" per collegare questo ingresso ad un lettore audio opzionale (ad es. lettore MP3, lettore CD, ecc.). Questo audio si sentirà a livello delle Uscite e dell'uscita Cuffie.
Funzioni base Modifica e salvataggio dei set batteria Importante: • Per modificare e salvare i set, bisogna essere in modalità normale. Se il LED al di sopra del tasto Song/Pattern non è acceso, tenere premuto Page/Select finché non si accende. • Ricordate di salvare i set dopo aver inserito le configurazioni desiderate! Innanzitutto, premere Kit fino a quando a display non compare NUM. Servirsi dei tasti < e > per selezionare il set desiderato.
Suonare a tempo con le canzoni Importante: per suonare le canzoni, occorre essere in modalità normale. Se il LED al di sopra del tasto Song/Pattern non è acceso, tenere premuto Page/Select finché non si accende. Per selezionare e riprodurre una canzone: 1. Premere Song fino a quando a display non compare NUM. 2. Servirsi dei tasti < e > per selezionare la canzone. 3. Premere Start / Stop per avviare la riproduzione.
Funzioni avanzate Regolazione delle impostazioni utilità Le impostazioni delle Utilità consentono di personalizzare ulteriormente le configurazioni dei pad e di regolare le impostazioni MIDI del modulo. Per regolare le configurazioni delle Utilità: 1. Battere il pad le cui configurazioni si desidera regolare, oppure premere il tasto Pad Select corrispondente. 2.
Per registrare l'esibizione con una canzone: 1. Regolare il numero di canzone (SNG) (come descritto nella sezione Per regolare le configurazioni di registrazione qui di seguito). 2. Iniziare a registrare (come descritto nel precedente paragrafo Per registrare). 3. Per riprodurre la registrazione, premere Play/Practice. Premere il tasto ancora una volta per interrompere la riproduzione. Per regolare le configurazioni di registrazione: 1.
Benutzerhandbuch (Deutsch) Einführung Kundendienst Die neuesten Informationen zu diesem Produkt (Systemanforderungen, Kompatibilitätsinformationen usw.) und die Registrierung Ihres Produkts finden Sie auf alesis.com. Für zusätzlichen Produkt-Support besuchen Sie alesis.com/support. Schnellstart / Anschlussdiagramm Einrichten und Spielen Crash 2 Becken-Pad* Tom 4 Drum Pad* * separat erhältlich Computer* Strom Smartphone, MP3-Player, etc.
Funktionen Vorderseite 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 32 Display: Zeigt die aktuellen Einstellungen und Funktionen des Moduls an. Song/Vorlage: Drücken Sie diese Taste im Normal6 2 3 4 Modus, um das Song-Menü aufzurufen, in dem Sie einen 1 Song auswählen oder Song-Einstellungen anpassen 8 7 5 können.
Oberseite 1. Ausgänge: Verwenden Sie handelsübliche 1/4" TRS-Kabel, um diese Ausgänge an einen Lautsprecher oder ein Verstärkersystem anzuschließen. Die Lautstärke dieser Ausgänge steuern Sie über den LautstärkeRegler. 7 5 6 4 3 1 2 2. Aux In: Verwenden Sie ein handelsübliches Miniklinke 1/8"-Stereokabel, um diesen Eingang mit einem optionalen Audio-Player zu verbinden (z.B. MP3-Player, CD-Player etc.). Dieses Audiosignal wird über die Ausgänge und über den Kopfhörer-Ausgang zu hören sein.
Grundfunktionen Drum Kits Bearbeiten und Speichern Wichtig: • Um Ihre Kits zu bearbeiten und zu speichern müssen Sie sich im Normal-Modus befinden. Wenn die LED oberhalb der Song/Vorlage-Taste nicht leuchtet, halten Sie Seite/Auswählen bis sie leuchtet. • Denken Sie daran Ihre Kits zu speichern, nachdem Sie die gewünschten Einstellungen eingegeben haben! Drücken Sie zuerst Kit bis NUM am Display erscheint. Verwenden Sie die Tasten < und >, um das gewünschte Kit auszuwählen.
Songs Begleiten Wichtig: Um Songs abzuspielen, müssen Sie sich im Normal-Modus befinden. Wenn die LED oberhalb der Song/Vorlage-Taste nicht leuchtet, halten Sie Seite/Auswählen gedrückt bis sie leuchtet. Hinweis: Während der Wiedergabe leuchten die Pad-Auswahltasten auf, um anzuzeigen, welche Drums spielen. Um diese Funktion zu deaktivieren bzw. erneut zu aktivieren, drücken Sie die Pad-Auswahltaste "Kick". Um einen Song auszuwählen und abzuspielen: 1. Drücken Sie zuerst Song bis NUM am Display erscheint.
Erweiterte Funktionen Anpassen der Optionen Mit den Optionen können Sie Ihre Pad-Einstellungen und die MIDI-Einstellungen des Moduls weiter anpassen. So passen Sie die Optionen an: 1. Betätigen Sie das Pad, dessen Einstellungen Sie anpassen möchten oder drücken Sie die entsprechende PadAuswahltaste. 2. Drücken Sie Optionen und anschließend Seite/Auswählen bis die gewünschte Einstellung am Display erscheint: 3. • SEN (Pad-Empfindlichkeit): Steuert, wie ein Pad reagiert, wenn es betätigt wird.
So nehmen Sie Ihre Performance mit einem Song auf: 1. Stellen Sie die Song-Nummer (SNG) ein (wie im folgenden Abschnitt Anpassen der Aufnahme-Einstellungen beschrieben). 2. Starten Sie die Aufnahme (wie im obigen Abschnitt So nehmen Sie auf beschrieben). 3. Um die Aufnahme abzuspielen, drücken Sie Spielen/Üben. Drücken Sie die Taste erneut, um die Wiedergabe zu stoppen. Anpassen der Aufnahme-Einstellungen: 1.
Appendix (English) Velocity Curves Curve 1 Curve 2 Volume Volume Velocity (striking Volume Curve 3 Curve 4 Velocity (striking Volume Velocity (striking Volume Curve 5 Velocity (striking Volume Velocity (striking Curve 6 Velocity (striking Pad MIDI Note Numbers Trigger MIDI Note Number Trigger MIDI Note Number Kick 36 Ride 51 Snare 38 Crash 1 49 Snare Rim 40 Crash 2 57 Tom 1 48 Hi-Hat Open 46 Tom 1 Rim 50 Hi-Hat Half-Open 23 Tom 2 45 Hi-Hat Closed 42 Tom 2 Rim 4
Technical Specifications Maximum Polyphony 64 Drum Kits 40 kits (24 preset kits + 16 user kits) 11 General MIDI kits Instruments 385 (drums, percussion, SFX) 7 hi-hat combinations (open/closed) Effects Reverb, 3-band equalizer Sequencer Normal Mode: 80 songs Learning Mode: 20 beats, 12 rhythms, 10 patterns Resolution: 120 ticks per quarter note Maximum Note Storage: approximately 1600 notes Tempo 30 BPM to 280 BPM Display Backlit segment LCD Connectors 9-trigger snake cable input (25-pin conn
alesis.com Manual Version 1.