Specifications

9
CHAPTER 2: RECORD SETUP
Several parameters are often adjusted prior to recording a Pattern, such as
metronome, Pattern length, etc. General instructions are:
1. Press the RECORD SETUP button.
2. Use the PAGE (up and down) buttons to select different "pages" of functions; the
display's lower right window shows the page number. These pages are described
below.
3. Adjust values on pages, if necessary, as described for each page.
4. After making all needed changes, press RECORD SETUP again to exit, or choose
another page.
One of the pages, Step Mode, contains several sub-pages.
2.1 PAGE 1: SELECT THE QUANTIZATION VALUE (QUANTIZE SELECT)
The display shows QUANTIZE SELECT and a note icon in the lower left Quantize
window.
PAGE
QUANTIZE
SELECT
SETUP
RECORD
QUANTIZE
The note icon displays the quantization value in standard rhythmic notation. Enter the
desired quantization value with the INC/DEC or number buttons (1 = quarter note, 2 =
quarter note triplet, 3 = 8th note, 4 = 8th note triplet, 5 = 16th note, 6 = 16th note
triplet, 7 = 32nd note, 8 = 32nd note triplet, 9 and 0 = Off, equivalent to 1/384th note
resolution).