User's Manual

10
+
+
+
Reverb
You can also add an adjustable reverb effect to your
sound.
To select the reverb effect type, press and hold Key
Function, and then press a key from C5 to F5. The
available selections for this Key Function are Off, (C5),
Hall 1 (C#5), Hall 2 (D5), Stage (D#5), Room (E5), and
Plate (F5).
To change the depth of the reverb, press and hold
Key Function, and then press F#5 or G5 respectively.
To increase or decrease this by multiple steps, press
and hold Key Function, and then press F#5 or G5
repeatedly.
To set the depth of the reverb to the factory default
value (3), press and hold Key Function, and then
press G#5.
Transpose
This key function allows the overall pitch of the piano
to be transposed up or down by a maximum of one
octave in semitone increments in either direction.
To change the transposition, press and hold Key
Function, and then press F#4 or G4 respectively. To
increase or decrease this by multiple steps, press and
hold Key Function, and then press F#4 or G4
repeatedly.
To set the transposition to the factory default value,
press and hold Key Function, and then press G#4.
Tuning
This key function allows the overall pitch of the piano
to be fine-tuned up or down by a maximum of 25
increments in either direction.
To change the tuning, press and hold Key Function,
and then press A4 or A#4 respectively. To increase or
decrease this by multiple steps, press and hold Key
Function, and then press A4 or A#4 repeatedly.
To set the tuning to the factory default value, press
and hold Key Function, and then press B4.