User manual

33
Appendix (English)
Strike Amp 12 Technical Specifications
Output Power
2000 W (peak, 1300 LF + 700 HF)
1000 W (continuous RMS, 650 LF + 350 HF)
Drivers Low-Frequency
12.0” (305 mm) low-frequency driver, 3.0”
(
76 mm)
high-temperature voice coil
High-Frequency
1.4” (35 mm) voice coil, neodymium-magnet
high-frequency driver with precision waveguide
Crossover Frequency
2.0 KHz
Maximum SPL
131 dB (peak), 128 dB (continuous) (dB-SPL @ 1 m)
Frequency Response
53 Hz – 20 kHz (+3 dB)
Frequency Range
46 Hz – 22 kHz (-10 dB)
Horn Coverage
90º horizontal x 60º vertical (nominal)
Equalization
Contour switch with low- and high-frequency +3 dB boost
Connectors
(2) XLR/TRS 1/4” (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Controls
Power switch, (2) volume control knobs
(1 per input), EQ contour switch,
ground-lift switch
Indicators
(2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
Protection
Electronic clip, thermal & transducer overdrive
Power Connection
IEC
Input Voltage
100 V~, 110–120 V~, 220–240 V~; 50/60 Hz (switchable)
Fuse
100–120V T10AL AC250V
220–240V T5AL AC250V
Consumption
800 W
Enclosure
Trapezoidal, injection-molded polypropylene enclosure with perforated
steel grille
Dimensions
(height x width x depth)
23.8” x 13.9” x 13.8”
605 x 354 x 350 mm
Weight
35.9 lb.
16.3 kg
Specifications are subject to change without notice.