2 SYNTAX ERROR enhanced audio computer system USER MANUAL
CONTENTS BASIC OPERATION ................................................................. 3 INS AND OUTS ........................................................................3 CONTROLS & DISPLAY ........................................................... 4 PRESETS...................................................................................5 EXPRESSION PEDAL ............................................................... 6 SOUND MODES ................................................................
BASIC OPERATION Welcome to Weirdville, population: you. The Alexander Syntax Error2 is our newest noisemaker, designed to help you create your very own arcade soundtrack using guitar, bass, keys, or whatever. Using the pedal is pretty simple: plug your instrument into the black INPUT jack and your amplifier or other effect into the white L / MONO jack, power up the pedal with 9V 250mA or more, and turn some knobs.
CONTROLS & DISPLAY The Syntax Error2 is a pretty complex pedal under the hood, but we worked hard to make sure that it’s easy to drive. We combined a simple user interface with a high-resolution OLED display to get you the maximum tweakability with the minimum frustration. The A B X Y knobs adjust the effects parameters or sequence steps, as shown on the display. The MIX / Data knob adjusts the overall wet / dry mix, or the data value for the selected parameter in the sequencer or config menu.
PRESETS How do you make quick changes on a pedal that has 9+ knobs? PRESETS. The Syntax Error2 allows you to save up to 32 presets that contain the entire state of the pedal. Loading a preset recalls all knob positions, sequence steps, sequencer settings, and expression pedal mappings. To load a preset, hold the BYPASS / PRESET footswitch. You can set the number of available presets in the Setup Menu, from 1 to 8.
EXPRESSION PEDAL Connect a TRS expression pedal to the MultiJack to control any or all of the pedal parameters remotely. The Syntax Error2 requires a TRS expression pedal, sleeve = 0V (common,) ring = 3.3V, tip = 0-3.3V. You can also use an external control voltage connected to tip and sleeve, as long as it doesn’t exceed 3.3V. If you’re using a MIDI controller, you can send MIDI CC 100, value 0-127. 0 is the same as full heel setting, 127 is toe setting.
SOUND MODES We’ve equipped the Syntax Error2 with six unique sound modes, each designed to create a wide variety of tones. Turn the MODE knob to select a new sound mode, then use the A B X Y knobs to tune the sound to your liking. You can tap the MODE knob to access the ALT controls page, for access to four extra control functions. Every sound mode has a common set of controls: SAMP: PITCH: P.MIX: VOL: TONE: Sample Crusher, reduces bit depth and sample rate at higher settings.
MINI-SEQUENCER The Syntax Error2 includes a versatile and powerful mini-sequencer, which can control any one of the pedal knobs. This enables you to create animated textures, arpeggios, LFO effects, and more. To enter the sequencer control mode, tap the MODE button until the page label reads SEQ. The A B X Y knobs will directly control the values of each sequencer step, so that you can dial in or tweak the sequence at any time.
GLOBAL CONFIGURATION To enter the global setup menu, first hold down the MODE knob, then press the left footswitch. Turn the MODE knob to select the parameter you want to change, then turn the MIX / DATA knob to set its value. Hold the MODE button to save your settings and exit the menu. MODE PRESS PAGE HOLD MENU M.JACK CHANNL RPHASE STEREO PRESET DISPLY CC OUT BRIGHT EXP LO EXP HI SPLASH RESET M.JACK EXPRESSN CHANNL 001 BYPASS NORMAL STEREO MONO+DRY 1 / 4 CFG v1.
STEREO MODES The Venture Series features advanced stereo routing cabilities, selectable in the Global configuration menu. Choose one of the following stereo modes to suit your rig or your gig. STEREO MODE: MONO INPUT BUFFER LEFT MIXER INPUT TIP OUTPUT BUFFER MIX OUTPUT DSP PROCESSING INPUT RING DRY OUTPUT INPUT BUFFER OUTPUT BUFFER Mono Mode processes the input signal in mono, and outputs a mono signal on the L / MONO output jack. The dry signal is available on the R / DRY output jack.
MIDI The Syntax Error2 features full and comprehensive MIDI implementation. Every single function and knob may be controlled by MIDI. The pedal will accept USB MIDI at any time, or may be used with 1/4” MIDI by setting M.JACK = MIDI in the Global configuration menu. The pedal will respond to MIDI messages sent on the channel set in the Global menu only. The 1/4” MIDI input is compatible with the Neo MIDI Cable, Neo Link, Disaster Area MIDIBox 4, 5P-TRS PRO, or 5P-QQ cables.
SPECIFICATIONS • Input: Mono or stereo (TRS) • Output: Mono or stereo (use either TRS or dual TS) • Input Impedance: 1M ohms • Output Impedance: 560 ohms • Power Requirements: DC 9V only, 250mA or greater • Requires isolated DC power supply • Dimensions: 3.7” x 4.7” x 1.
