Installation Guide

2018‐03‐27 Page5of11
INSTALLATIONGUIDE
1. Setup

a) Useachalklinetotracealineontheflooracrossthedooropening
onbothsidesofthewall.
2. Prepareframe

a) Lay down Hinged Gap Jamb Assembly (A) with gap jambs on the
floor.
b) Lift cross pieces in upright position perpendicular to gap jamb
starting from the bottom and moving up (1, 2 then 3 as shown in
drawingtotheright).
c) Attachthe2 DetachableCrossPieces(F)byinsertingtheprotruding
screws into the keyhole bracket and locking in place.Make sure
theyareorientedthesameastheothercrosspieces.
a),b),c)