Section 1 – Training Guide Summary Section 2 – Wireless Information Serial Number Supervision Section 3 – Key Features Section 4 – Specifications Section 5 – Compatible Wireless Offerings Section 6 – PC9155 Suite Overview Compatible Device/Detector List PC9155 Enclosure Details PC9155 Circuit Board – Overview PC9155 Circuit Board – Terminals WT5500 Overview WT4901 Overview WT4911 Overview WT4989 Overview WS4913 Overview WS4985 Overview GS2065 Overview TL265GS Overview Section 7 – Programming Navigation Gene
Welcome to the 2-way wireless security suite training guide. This guide is designed to provide technical information about the 2-way wireless security suite in preparation for the upcoming technical presentation (in-class or video conference). Most of the information outlined in this guide will also be covered during the in-class/ video session. The in-class/video session will however primarily focus on key features, installation, product overview etc.
Serial Numbers: PC9155: The PC9155 requires that all device/detector are programmed with an 8-digit serial number. Wireless Devices: 1 – Way Devices: the serial number for these devices are 6-digits in length. Since the PC9155 requires that serial number are programmed with 8-digits, enter ‘00’ prior to entering the 6-digit number. 2 – Way Devices: these devices are 8-digits Wireless Supervision Supervisory Signal: Each wireless device automatically transmits a supervisory signal every 64 minutes.
1-way, 2-way wireless detector support 2-way wireless keypad support (WT5500) Wireless Quick Enroll Template programming Account Code Error Checking Alternate communications via GSM/GPRS and IP Local and remote downloading 4 communication phone numbers 2 Input/Output terminals Front and back tamper Onboard Siren at 85dB False alarm reduction features
Specifications: Number of Zones Supported 34 zones (32 wireless, 2 hardwired) Number of Key FOBs Supported 16 Number of Proximity Tags Supported 17 Number of PGMs Supported 2 Access Codes 17 (16 user codes, 1 system master) Communication Format Automatic SIA, Automatic Contact ID, Pulse, Residential Dial Number of Keypads 4 (WT5500) Number of Sirens 4 (Combination of WT4901/WT4911) AC Power Requirements 16.5VAC, 20VA Battery Requirements 12vdc, 2.3 AH AUX Current 12vdc, 200mA (Max.) PGM Current 50mA (Max.
List of devices in the 2-way wireless security suite: - PC9155 control panel - WT5500 2-way wireless keypad* - WT5500P 2-way wireless keypad with prox tag (PT4) support* - WT5500D 2-way wireless keypad (desk stand version) - WT4901 2-way wireless indoor siren* - WT4911 2-way wireless outdoor siren* List of current 1-way wireless devices: Motion Detectors: All existing 433MHz wireless detectors are compatible List of new 2-way wireless devices: - WT4989 2-way wireless key FOB* Door/Window Contacts EV-DW49
= ‘Ready’. This indicator is active when all zones are secure = ‘Armed’. This indicator is active when the system is armed = ‘Trouble’. This indicator is active when a system trouble is present = ‘AC Status’. This indicator is active when AC power is present = ‘Communicator Trouble’. This indicator is active when a trouble is present on the GS/IP module = ‘Network ’. This indicator is active when the internet communicator is absent = ‘Signal Strength (Hi)’.
Network cable channel Zone wire channel AC power wire channel Telephone
On-board siren Connector PC-LINK Connector: - local DLS connection using PC-LINK cable - GS/IP module connection Red Terminal Strip On-board siren
Telephone Connections T-1/R-1 - return telephone connection to premise AC AC power connections. 16.5VAC, 20VA TIP/RING - incoming telephone service I/O Terminals I/O 1 - configurable as zone input or PGM output. Zone#33 when configured as a zone input. Max. 50mA when configured as a PGM output. I/O 2 - configurable as zone input or PGM output. Zone#34 when configured as a zone input. Max. 50mA when configured as a PGM output. AUX -/+ Power connections for 12vdc devices. Max.
Overview: The WT5500 is the fully supervised 2-way wireless keypad for the 2-way wireless security suite Specifications: Temperature range: -6 ºC to +54 ºC (22 ºF to 140 ºF) Transformer voltage: 4.5V @ 0.
16 1 2 15 3 14 4 13 5 6 12 7 11 8 10 Status LED Indicators 1 – Ready 2 – Armed 3 – Trouble 4 – AC Status Function Keys 5 – Stay Arm 6 – Away Arm 7 – Chime Enable/Disable 8 – Zone Bypass 9 – Quick Exit Emergency Keys 10 – Panic 11 – Auxiliary 12 - Fire 13 – Arrow Keys 14 – Prox Sensor (WT5500P Only) 15 – Light Sensor 16 – Custom LCD Screen 9
Overview: The WT4901 is a fully supervised 2-way wireless indoor siren for the 2-way wireless security suite Specifications: Operating Temperature: -10 ºC to +55 ºC (14 ºF to 131 ºF) Batteries: (4) AA 1.5V Alkaline Battery Life: 2 years (typical usage) Low Battery Level: 5.
Test Button: Press and hold the test button for 5 seconds to confirm operation. The sounder will activate for 4 seconds. 2 seconds at medium volume and 2 seconds at full volume. Siren Tamper Battery Compartment: 4xAA 1.
Overview: The WT4911 is the fully supervised 2-way wireless outdoor siren for the 2-way wireless security suite Specifications: Operating Temperature: -35 ºC to 70 ºC (-31 ºF to 158 ºF) Batteries: 1 ‘D’ Cell Lithium (Custom DSC part – WT4911 – battery) Battery Life: 4 years (typical usage) Low Battery Level: 5.
Tamper Battery Pack Battery Cable Battery Connector
Overview: The WT4989 is a five button, 2-way wireless key FOB for the 2-way wireless security suite Specifications: Operating Frequency: 433MHz Batteries: (2) CR2032, 3V Lithium Battery Life: 3 years (under typical use) Dimensions (LxWxH): 75mm x 40mm x 16mm Weight: 41g Features: Backlit icon display Built-in buzzer for audible feedback Key tactile feedback 4 one touch function keys, programmable for up to 6 functions 2 double touch function keys Status button indication Keylock Active alarm indication 3
Status – press for 1 second to display system status via LCD ICON display Status Request/ Keylock Button#1 Stay Arm Button#2 Away Arm Button#3 Disarm Button#4 Panic Button#5 Command Output#1 Button#1 Stay Arm Button#2 Away Arm Button#6 Command Output#2 Button#3 Disarm Button#4 Panic Keylock Enable/Disable Status Button#2 Away Arm
Programming: The WT4989 supports internal programming that provides the user to configure the remote to suit their needs. To customize the WT4989: Step 1 – Press and hold all four buttons simultaneously for 5 seconds.
Overview: The WS4913 1-way wireless CO detector supports the ability to detect excess carbon monoxide levels Specifications: Sensor: Electrochemical carbon monoxide sensor Dimensions: 1.42" x 4.
Operation: The CO alarm will go into alarm when the concentration of carbon monoxide (CO) in the air around the device exceeds the 'alarm' threshold During an alarm, the red LED light will flash quickly and the buzzer will activate (repeating 4 quick beeps, pause 5 seconds) After 4 minutes of being in alarm the pause between beeps will change to 60 seconds (4 quick beeps, pause 60 seconds) The alarm will continue to sound until the concentration of CO in the air around detector drops below the ‘alarm’ thres
Overview: The WS4985 1-way wireless flood sensor supports the ability to detect excess water levels Specifications: Operating Frequency: 433MHz Batteries: (2) CR2032, 3V Lithium Battery Life: 3 years Dimensions: 75mm x 40mm x 16mm Weight: 41g
Overview: The GS2065 provides primary or backup GSM/GPRS communication for the 2-way wireless security suite Specifications: Dimensions : 3.937"x5.875"x0.625" (100mmx150mmx15mm) Weight : 68 g Input Voltage : 10 to 13.
Overview: The TL265GS is an Internet and GSM/GPRS Dual-Path alarm communicator for the 2-way wireless security suite Specifications: Dimensions : 3.937"x5.875"x0.75" (100mmx150mmx18mm) Weight : 78 g Input Voltage : 10 to 13.
Programming Navigation Navigating through programming is simple and intuitive.
Quick Enroll: The Quick Enroll programming method is designed to reduce the time required to program wireless devices/detectors. The following information is programmable when using the Quick Enroll method: Serial Number - no need for programming serial numbers manually.
Template Programming: Template programming provides a quick and easy method of programming the control panel’s core features. To use template programming, perform the following: Step 1 – Enter Installer programming, [*][8] + [Installer Code] Step 2 – Enter Section [899] Step 3 – The keypad will display 4-digits. Each digit in each segment represents the template programming currently selected.
BEFORE YOU BEGIN Have the following ready before initializing the system: AC transformer Wire attached to transformer Control panel backup battery Battery connection harness Batteries for WT5500 2-way wireless keypad Screwdriver Summary of Installation Steps Step 1 – Mounting the PC9155 Step 2 – Apply power to the PC9155 Step 3 – Enroll the first WT5500 wireless keypad Step 4 – Enroll additional wireless devices and detectors Step 5 – Test all wireless devices and detectors Step 6 – Additional installer pr
Step 2 – Apply power to the PC9155 Connect AC power and battery. During the first 2 minutes of power the ‘Ready’ and ‘AC’ indicators will flash Step 3 – Enroll the first WT5500 wireless keypad Press and hold the [*] and [1] simultaneously within the first 2 minute of applying power to the PC9155 control panel. When successfully enrolled, the keypad will display ‘WFKP Enrollment Successful’ Note: this must be performed within the first 2 minutes of applying power to the PC9155.
Enrolling additional wireless keypads (WT5500) Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898]) - the display will read ‘Wireless Enrollment Mode’ Step 2 – Press and hold the [1] and [*] keys simultaneously - the display will indicate the serial of the keypad Step 3 – Press [*] to confirm the correct device Step 4 – Enter the slot number of the keypad [1, 2, 3 or 4] Step 5 – Repeat Steps 2-4 to enroll additional keypads Notes: - if the display does not indicate the serial number of the desired
Enrolling wireless detectors Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898]) - the display will read ‘Wireless Enrollment Mode’ Step 2 – Trigger the detector Door/window contact – activate tamper or violate contact Motion detectors – activate tamper Smoke Detector – activate tamper Glassbreak Detector – activate tamper Panic Pendant – Press and hold button for 2-3 seconds CO Detector – activate tamper Flood Sensor – activate tamper - the display will indicate the serial of the detector trigger
Enrolling wireless key FOBs (1-way and 2-way) Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898]) - the display will read ‘Wireless Enrollment Mode’ Step 2 – Press a button on the FOB to be enrolled - the display will indicate the FOB Step 3 – Press [*] to confirm the correct device Step 4 – Enter the 2-digit slot number of the FOB ([01] – [16]) Notes: - if the display does not indicate the serial number of the desired detector to be enrolled, press [#] and repeat Step 2 - if the slot number enter
Step 5 – Test all wireless devices and detectors Step 1 – Enter Wireless Placement Test ([*][8] + Installer Code + [904]) - the display will read ‘Activate Device For Test’ Step 2 – Activate each wireless device/detector one at a time from the proposed mounting location Wireless Keypad – [*] and [1] simultaneously Wireless sirens (WT4901, WT4911) – activate tamper Door/window contact – activate tamper or violate contact Motion detectors – activate tamper Smoke Detector – activate tamper Glassbreak Detector
Step 6 – Additional installer programming After the PC9155 has been initialized and the wireless devices/detectors have been enrolled and tested, the next step is to program additional system information.
Replace There are two methods for replacing wireless devices: Method#1 – Quick Enroll Step 1 – Enter Quick Enroll ([*][8] + Installer Code + [898]) Step 2 – Trigger the device or detector Wireless Keypad – [*] and [1] simultaneously Wireless sirens (WT4901, WT4911) – activate tamper Door/window contact – activate tamper or violate contact Motion detectors – activate tamper Smoke Detector – activate tamper Glassbreak Detector – activate tamper Panic Pendant – Press and hold button for 2-3 seconds CO Detector
Overview: The I/O terminals on the PC9155 may be used as either a hardwired zone input or PGM output. Note: a combination of zone input and PGM output may be used on the same control panel Example – O/I 1 = PGM, I/O 2 = Zone or vice versa Zone Input: Overview: The on-board I/O terminals may be used as a zone input.
[*][1] – Zone Bypass: Summary: Zone bypassing allows for a zone or series of zones to be ignored during the next arming. This command is performed when the system is disarmed.
[*][2] – System Troubles: Summary: This command is used to display system troubles. Operation: [*][2] [*][2] – Troubles Overview: This command is used to display system troubles.
[*][2] – System Troubles (continued): [4] - FTC Trouble (Failure To Communicate) This trouble condition is generated when the control panel fails to report a signal to the central station [5] – Wireless Device/Detector Fault or DEOL Zone Fault A zone fault condition is generated due to any of the following: Wireless - If a wireless device fails to report a status or supervisory signal within the wireless supervisory window (Zone, Keypad or Siren) DEOL (Double End Of Line) - If a short circuit is detected.
[*][3] – Alarm Memory: Summary: This command is used to display zones which were in alarm during the last armed state. Operation: [*][3] Notes: - alarm memory will be cleared when the system is rearmed. - If the alarm memory has been cleared, the event buffer can be used to display previous alarms - alarm memory is clear the next time the control panel is armed [*][4] – Enable/Disable Door Chime: Summary: This command is used to enable/disable the door chime feature.
[*][5] – Access Code Programming: Summary: This command is used to modify user access codes. Access Code Breakdown [01] - [16] - User Codes (default = 'AAAA'), [40] - Master Code (default = '1234') Operation: Adding/Editing User Code Step 1 - Enter [*][5][Master Code] Step 2 - Enter user code number Step 3 - Enter new 4 or 6-digit code Note: - if using a WT5500P, the user will be prompted to present a prox tag to associate to the user code after Step 3.
[*][6] – User Functions: [*][6] + [Master Code or Supervisory Code] + [Option] Option [1] – Program Time/Date Step 1 – [*][6]+ [Master Code or Supervisory Code] Step 2 – Press [1] Step 3 – [HH:MM MM:DD:YY] The control panel Time/Date needs to be programmed each time AC and backup battery are removed.
[*][6] – User Functions (Continued): Option [8] – Late to Open Enable/Disable When enabled, the control panel will report a ‘Late To Open’ reporting code to the central station if the system is not disarmed before the time programmed in Option [9] is reached Option [9] – Late to Open Time of Day This option is used to specify the ‘Late to Open’ time Step 1 – [*][6]+ [Master Code or Supervisory Code] Step 2 – Press [9] Step 3 – Press [1 -7] for the required day of the week (1 = Sunday) Step 4 – Enter HH:MM (
[*][7] – Command Outputs: Summary: This command provides the ability to activate/deactivate PGM outputs programmed as a ‘Command Output’ option. Operation: [*][7] + [1] or [*][7] + [1] + [Access Code] [*][7] + [2] or [*][7] + [2] + [Access Code] [*][8] – Installer Programming: Summary: This command allows the user to enter ‘Installer Programming’. Operation: [*][8] + [Installer Code] Notes: - The default installer code is ‘5555’.
[*][0] – Quick Arm: Summary: This command is used to arm the control panel without using a user access code. Operation: [*][0] Note: this feature is performed while the system is disarmed [*][0] – Quick Exit: Summary: When performed, this command will enable a 2 minute window. During this window any one delay type zone (Delay 1 or Delay 2) may be violate and then restored once.
The PC9155 supports 3 modes of arming: Stay Arm Away Arm Night Arming Stay Arming Arming in the ‘Stay’ mode indicates that all zone on the control panel are active with the except for ‘Stay/ Away’ type zones. It is common to define motion detectors zones as ‘Stay/Away’ type zones. Arming in the Stay mode is typically performed when the user wishes the stay at home and have the ability to walk freely inside without causing alarms, yet still provided with perimeter protection.
