Instruction Manual

5.2 Tips and tricks
Wink function: Locating a CM among other CM´s
To easily identify a CM from others, use the Wink functionality. In the My Devices list tap and hold a
CM card, until the Wink dialog pops up. Selecting Wink, will instruct the CM to flash purple with 1
second between flashes for a total of 1 minutes, giving the user time to visually locate the CM.
Sleep mode for storage
When storing a CM, remember to put it in sleep mode, in sleep mode all data will be preserved, while
all sub routines such as measuring, logging and comparison with baseline levels, are suspended.
While in sleep mode, the CM life expectancy is greatly increased. To exit sleep mode, simply perform
one of the two wake instructions. See Section 3.3 Setup
Name your CM
For a quick and easy overview of your equipment, use the custom name function and name your CM
with either type/name/P&ID or something unique to you.
For example, “SRU3 Intake ID 5.02”.
Event log
If the CM has observed vibrations that triggered a notification, use the Event log to see details of
exactly when the notification occurred.
5.3 Parts lists
Item name. Article number. Description.
CM 8010000561 Condition Monitor.
Screw M6 8010000565 Condition Monitor Mounting screw.
200002050-2-EN-GB 19
Troubleshooting 5 EN