User's Manual

January 13, 2009 / Version: 2.0 16

B. Tunnel Authentication: The tunnel authentication will differ from the EAP method you

have chosen, the result is shown below:

For Windows 2000 User:

EAP Method Tunnel Authentication

PEAP EAP-MSCHAP v2 , EAP-TLS/Smart Card, Generic Token Card

TLS/Smart Card (no selection)

TTLS CHP, MS-CHAP, MS-CHAP-V2, PAP, EAP-MD5

EAP-FAST Generic Token Card

MD5-Challenge (no selection)

For Vista User:

EAP Method Tunnel Authentication

PEAP EAP-MSCHAP v2 , EAP-TLS/Smart Card, Generic Token Card

TLS/Smart Card (no selection)

EAP-FAST (no selection)

LEAP (no selection)

C. Session Resumption: Mark to enable this function or unmark it to disable.

After doing the above settings, please click on the tabs below. There are several tabs on the

window, please fill in the information gradually.

Settings for: Authentication ID/Password, Tunnel ID/Password and

Password Mode

Settings for using the Client Certificate function or not.

Settings for using the Server Certificate function or not.

Setting for EAP-FAST method.

Settings for Single Sign On. Note: This tab only appears in Vista

system.

Password mode is only available in EAP-FAST method.

Чʳ Click on these tabs