User's Manual

January 13, 2009 / Version: 2.0 22
WMM
This page allows users to activate the WMM function for this device. Please note that this function
only works while connecting to a WMM compatible device.
Items Information
WMM Enable Enable Wi-Fi Multi-Media.
WMM - Power Save Enable Enable WMM Power Save. Please enable WMM before
configuring this function.
Direct Link Setup Enable Enable DLS (Direct Link Setup). Please enable WMM before
configuring this function.
MAC Address Fill in the blanks of Direct Link with MAC Address of STA.
Timeout Value Time of automatically disconnect after some seconds. The
value is integer. The integer must be between 0~65535. It
represents that it always connects if the value is zero.
Default value of Timeout Value is 60 seconds.
Apply / Tear Down After fill in the "MAC Address" and "Timeout Value", click
"Apply" button to save your configuration. The result will
appear in the following "DLS Status" blanks. To remove
the configuration, please select the configuration in the
blanks and then click "Tear Down" button.