User manual

104-bit).
Key Format Select the WEP shared secret key format from
pull-down menu. The format can be chose
between plant text (ASCII) and hexadecimal
(HEX) code.
Default Tx Key Set the default secret key for WEP security
function.
Value can be chose between 1 and 4.
Encryption Key 1 Secret key 1 of WEP security encryption
function.
Encryption Key 2 Secret key 2 of WEP security encryption
function.
Encryption Key 3 Secret key 3 of WEP security encryption
function.
Encryption Key 4 Secret key 4 of WEP security encryption
function.
Apply Changes Click the Apply Changes button to complete
the new configuration setting.
Close Click to close this WEP Key setup window.
Reset Click the Reset button to abort change and
recover the previous configuration setting.
WEP encryption key (secret key) length:
Length
Format
64-bit 128-bit
ASCII 5 characters 13 characters
HEX 10 hexadecimal codes 26 hexadecimal codes
2.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose
wireless MAC addresses are in the access control list will be able to
connect to your Access Point. When this option is enabled, no
wireless clients will be able to connect if the list contains no entries.