AWUS036H Long-Range Indoor IEEE 802.11g USB Adapter User’s Guide Alfa Network, Inc.
Table of Content Over view .......................................................................................................................3 Unpacking information ............................................................................................3 Introduction to the AWUS036H Indoor USB Adapter..........................................4 Installation Guide .....................................................................................................5 Software Installation .............
Overview Thank you for purchasing this product. Please read this chapter to better understand your AWUS036H Long Range indoor USB Adapter Unpacking information Before getting started, please verify that your package includes the following items: 1. AWUS036H Long-Range 802.11g Indoor USB Adapter 2. One Utility/ Manual CD 3. USB Cable 4 Alfa Network, Inc.
Introduction to the AWUS036H Indoor USB Adapter The AWUS036H IEEE 802.11g indoor USB adapter provides users to launch IEEE 802.11g wireless network at 54 Mbps in the 2.4GHz frequency, which is also compatible with IEEE 802.11b wireless devices at 11Mbps. You can configure this adapter with AP mode to connect/share to other 2.4GHz wireless computers or with Infrastructure mode to connect to a wireless AP or router for accessing to Internet.
Installation Guide Software Installation Note: The following driver installation guide uses Windows 7 as the presumed operation system. The procedures and screens in Windows 98se, 2000, XP are similar with Windows 7. Insert the installation CD that came with this product to your CD-ROM drive. Please click the “Windows 7/Vista/XP” button from the popup menu for this product. Note: If the CD-ROM fails to auto-run, please click on “My Computer” your CD-ROM Drive will then double-click the “AutoRun.
1. Select the language for the installation. 2. The welcome window will pop up. Click the “Next” button to proceed. 3. Click “Install” button to continue the installation. Alfa Network, Inc.
4. Installation is in progress, please wait. 5. Click the “Finish” button to complete driver and utility installation. Note, please insert this USB wireless adapter to your computer if you’re using Windows 7, Vista, XP, or Windows 2000. If you are using Windows 98se or ME, please restart the system first before connect this wireless adapter to your computer. 6. Windows 7 detects new hardware has been inserted and driver is installed. Alfa Network, Inc.
Found New Hardware Wizard in Windows XP, 2000, and Vista. 1. The “Found New Hardware Wizard“ will pop up. (Note: This wizard won’t pop up in Windows 98 and ME. The system finds the new hardware and installs the hardware automatically. Please skip the following steps) 2. Select “No, not this time” and click the “Next” button. 3. Select “Install the software automatically” and then click the “Next” button. 4. Please wait while installing the driver. The Windows logo testing warning message may pops up.
5. Click the “Finish” button to complete installation. Alfa Network, Inc.
Management Guide Please read this chapter to better understand the management interface of your AWUS036H Long Range Indoor USB Adapter Making a Basic Network Connection Before You Start In the following instructions for making a network connection, we use the utility we provided to configure your wireless network settings.
To use this adapter in Ad-Hoc Mode 1. Double click the icon on your desktop. 2. Click the “Available Network” button to scan available wireless network adapters. Double click on the network adapter that you are going to connect to. 3. Click the OK button to confirm that you are connecting to an open wireless network. 4. Click OK to add this network into the profile list. Note: This example is an open wireless network.
Infrastructure mode An Infrastructure Mode network contains at least one wireless client and one wireless AP or router. This client connects to Internet or intranet by communicating with this wireless AP. Alfa Network, Inc.
To use this adapter in Infrastructure Mode: 1. Double click the icon on your desktop. 2. Click the “Available Network” button to scan available access points. Double click on the AP that you are going to connect to. 3. Click the OK button to confirm that you are connecting to an open wireless network. 4. Click OK to add this network into the profile list. Alfa Network, Inc.
Note: This example is an open wireless network. If you are going to connect to an AP with security protection, you will have to configure the encryption settings in this profile to be corresponding to your AP. Please click on the “Network Authentication” drop list to select an authentication method, and then select a “Data encryption” type. Fill in each required blanks and click “OK”. Introduction to the Wireless LAN Utility Note: This management instruction uses Windows 7 as the presumed operation system.
General After starting the utility, the general page pops up This General tab and provide the information of your current wireless network connection. You may click the Renew button to refresh those listed information. Status: Check if the device associated to target network. Speed: The current connection speed Type: Infrastructure mode or Ad-Hoc mode. Encryption: The performing encryption mode for connecting to current network profile.
Profile The Profile tab lists the preferred connections. You can click the buttons on the right-hand side to configure each connection. Add Click this button to add a connection profile for this adapter. Remove To remove a connection profile, click this profile on the profile list and click this button to delete it. Edit To modify the configurations for a profile, click this profile on the profile list and click this button to edit.
Available Network The available tab lists the reachable wireless network for the adapter. Refresh Click this button to rescan available networks around the adapter. Add to Profile To add an available Network to your profile list, select an available network and click this button to add. Alfa Network, Inc.
Advanced This Advanced tab p r ovi des advan c ed c o n figu rati on s to th i s adapter. Every modification in this tab will be performed after clicking the Apply button. To restore the default settings of the advanced tab, click the Set defaults button to perform restoring. Power Save None Min Max Disable Power saving function.
Status This tab shows the current connection status of this adapter. Statistics See Statistics tab to show the transmission activity record. Clicking the “Reset” button recounts the values from zero. Alfa Network, Inc.
Appendix RT-Set Setup Wizard For Windows 2000, XP, Vista users to connect to a wireless network easily, we also provide the RT-Set setup wizard to help users set their preferred wireless network step by step. You can configure your wireless network via this RT-Set setup wizard in the following three modes: Station mode (infrastructure): Select this mode to connect to the AP (access point) in your LAN. Station mode (ad hoc): Select this mode to connect to another wireless network adapter in your LAN.
2. The RT-Set scans the available AP within your LAN. Those AP are listed with their SSID. Click the wireless AP that you are going to connect with and then click the “Next” button. You may also click the “Refresh” button to scan wireless AP again. 3. The “unsecured network” window may pop up if the AP you select doesn’t use security encryption settings. Click the “OK” button after your confirmation. 4.
5. Configure the IP address for the incoming connection. You may choose “Use the following IP address” to fill in IP addresses manually or choose “Obtain an IP address automatically (recommended)”. 6. After configuring the IP addresses, click the “Finish” button to complete. Alfa Network, Inc.
Connect to a wireless network in ad hoc mode 1. To connect this adapter to another computer, select the “Station (ad hoc)” mode and click the “Next” button to proceed. 2. The RT-Set scans the available wireless adapters within your LAN. Those adapters are listed with their SSID. Click the one that you are going to connect with and then click the “Next” button. You may also click the “Refresh” button to scan the wireless adapter again. Alfa Network, Inc.
3. The “unsecured network” window may pop up if the adapter you select doesn’t use security encryption settings. Click the “OK” button after your confirmation. 4. Click “OK” after configuring the profile content to be corresponding to the wireless adapter that you are going to connect with. If you are connecting to a wireless adapter without security encryption, please click “OK” button without configuration. 5. Configure the IP address for connecting to the wireless adapter.
Use this adapter as an AP 1. To use this adapter as an AP (access point), select the “AP” mode and click the “Next” button to proceed. 2. Select “Normal User” (recommended) to make a step-by-step configuration. You may also select “Advanced Users” to configure this AP with more detail. 3. Assign an SSID for this AP, the name will be identified as your network while other wireless devices scan for available network. Choose to use WEP encryption or from the drop list and click “Next” to proceed.
4. Click the “Next” button after confirming the settings above. 5. Click “Finish” to complete setup. Alfa Network, Inc.
AP mode management guide General After configuring the adapter in AP mode, this “General” page shows up, which shows the general information of this AP. SSID: The SSID (network name) of the wireless network constructed by this AP. BSSID: The MAC address of this AP Config: Click this button to change configurations to this AP Association Table: Shows the information of the devices that connects to the AP including their MAC addresses and the time that they connected with this device.
Advanced Beacon Interval: Define the interval between beacons from 20~1000 DTIM Period: Set the DTIM period between 1~255 Preamble Mode: Click the drop list to select the preamble to be long, short or auto Set Defaults: Click this button to restore the settings above to default Apply: Click this button to execute changes. Alfa Network, Inc.
Statistics The “Statistics” tab shows the transmission activity record. Clicking the “Reset” button and recounts the values from zero. ICS (Internet Connection Sharing) This page allows users to select the adapter to connect to the public network. Please click on the device that are used for connecting to the public network and click the “Select” button, and then click the “Apply” button to execute. Alfa Network, Inc.
Product Specification Standard IEEE 802.11b, IEEE 802.11g Interface USB rev1.0/1.1/2.0 Security 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), AES Receiver Sensitivity 54Mbps OFDM, 10%PER, -68dBm 11Mbps CCK, 8%PER, -86dBm 1Mbps BPSK, 8%PER, -92dBm Channel USA 11, Europe 13 Data Rate 802.11b: 1, 2, 5.5 and 11Mbps 802.