Owner's Manual

GETTING TO KNOW YOUR CAR
To make a telephone call with
the voice commands (after
matching voice samples to the
numbers in the phone directory)
– press the green button (A)
– wait for the beep and/or the word
“PHONE” to be shown on the radio display
– pronounce the name of the person
you wish to call
– the system will repeat the pronounced
name to confirm it and then make the
telephone call
– if the name pronounced by the system
for confirmation is different from the wished
one, press the red button (B) and repeat
the procedure.
The telephone call made with the voice
commands is possible only for the names
in the directory matched to a voice sample.
The handsfree system can recognise all
the voice samples recorded on the cellular
phone, thus making it possible to call with
the voice command all the numbers
matched to the voice samples.
Anyway, it is possible to memorise (depend-
ing on the type of cellular telephone) the voice
samples directly in the handsfree system direc-
tory, but, in this case, the handsfree system
will recognise only these voice samples.
IMPORTANT To be recognised by the
system the voice commands must be pro-
nounced keeping a natural tone, articulat-
ing the words well and clearly.
For an optimal result, it is suggested to
associate the voice samples in the follow-
ing conditions:
– with doors and windows closed
– with ventilation and engine off (igni-
tion key at MAR)
– from the driver’s seat
– preferably using long names (for
example: “Mario Rossi” instead of
“Mario”); the system records a voice sam-
ple for max 2 seconds.
IMPORTANT Before using the voice
commands make sure that on the cellular
phone the following functions are on:
Bluetooth
®
, “Voice commands” and
“Wordspotting” (according to the type of
cellular phone). The performance of the
voice recognition are variable and depend
on the model of the cellular phone used.
179
110-185_Alfa147 Q2 GB 4-07-2008 12:02 Pagina 179