Owner's Manual

IN AN EMERGENCY
220
GLOVEBOX LIGHT (fig. 42-43)
To change the bulb, proceed as follows:
– Open the glovebox, then remove the
light unit (A) levering in the point shown by
the arrow.
– Open the protection (B) and change the
snap-fitted bulb.
– Close the protection (B) on the trans-
parent cover.
fig. 42
A0A0181m
BOOT LIGHT (fig. 44-45)
To change the bulb, proceed as follows:
– Open the tailgate.
– Remove the light unit (A) levering in
the point shown by the arrow.
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into place.
fig. 43
A0A0182m
fig. 44
A0A0183m
197-233_Alfa147 Q2 GB 4-07-2008 12:04 Pagina 220