Owner's Manual

GETTING TO KNOW YOUR CAR
92
AIR COOLING
AND DEHUMIDIFYING
(fig. 102/a)
To cool and dehumidify the air with the en-
gine running and the windows shut, proceed
as follows:
- temperature adjustment knob (1), point-
er on blue sector.
- air quantity adjustment (2), knob point-
er on the speed required to personalise the
amount of air admitted
- air distribution (3), knob pointer at the
required symbol.
- air vents completely open.
- compressor on enable button(4) pressed
√
(for versions/markets where applicable)
(led next to button on) (only for versions
with manual climate control system).
Wishing to moderate the cooling action,
increase the temperature turning the knob
ring (1) towards the red sector, until ob-
taining the required temperature.
Proceed as follows to obtain the maximum
cooling power:
- set the pointer of knob (1) as far as it
will go counter-clockwise (minimum tem-
perature blue sector);
- set the pointer of knob (2) to the max-
imum fan speed.
- press the inside air re-circulation on but-
ton (5)
v
.
- set the pointer of the air distribution knob
(3) to the required position (position ¥ is
recommended).
- air vents completely open.
- compressor on enable button (4)
√
pressed (led next to button on) (only for
versions with manual climate control sys-
tem).
The use of the climate control system at
minimum temperature should be restricted
to short lengths of time and very hot cli-
mates, to avoid over-cooling the passenger
compartment.
A0A0220m
fig. 102/a
When cleaning the inside
of the rearscreen, take
care not to damage the
heating filaments.
086-109_Alfa147 Q2 GB 4-07-2008 12:00 Pagina 92