Operation Manual

TURN SIGNALS/HEADLIGHTS/HIGH BEAMS LEVER
The Tur n Signal/Headlight Lever is located on the left side of the steering column.
Turn Signals/Lane Change Assist
Tap the lever up or down once and the turn signal (right or left) will flash five times and
automatically turn off.
Headlights/Parking Lights
Rotate the end of the multifunction lever upward to the first detent for headlight operation.
NOTE:
• The ignition switch must be in the ON/RUN position for the headlights to operate.
• To turn on the parking lights, remove the key or tur n the ignition to OFF/LOCK position and turn
on the headlights.
High Beam Operation
Pull the multifunction lever toward you to switch the headlights to high beam. Pull the multifunction
lever a second time to switch the headlights back to low beam.
A high beam symbol will illuminate in the cluster to indicate the high beams are on.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight glare
and as a cour tesy to other motorists.
Tur n Signal/Headlight Lever
1 — Headlights
2 — Turn Signals
3 — Flash To Pass
4 — High Beams
OPERATING YOUR VEHICLE
22