Operation Manual

Start Of Trip Procedure

With the ignition on, push and hold the TRIP RESET button for over two seconds to reset.

New Trip

To reset:

1. Push and hold the TRIP button to reset the system manually.

2. When the “Trip distance” reaches 99999.9 miles or kilometers or when the “Travel time”

reaches 999.59 (999 hours and 59 minutes), the system is reset automatically.

3. Disconnecting/Reconnecting the battery resets the system.

NOTE:

If the reset operation occurs in the presence of the screens concerning Trip A or Trip B, only the

information associated with Trip A or Trip B functions will be reset.

Exit Trip

1. To exit the Trip function, wait until all the values have been displayed or hold the SET/Retur n

Arrow button for longer than one second.

2. Briefly push the SET/Return Ar row button to go back to the menu screen or push and hold the

SET/Return Arrow (approximately one second) to go back to the main screen without storing

settings.

Values Displayed

Indications On EVIC Display

Each time a value is selected, the following infor mation is shown:

After a few seconds, the name of the selected

value is replaced by the cor responding icon.

EVIC Display Of Trip Information

ELECTRONICS