Specifications

IN AN EMERGENCY
204
BOOT LIGHT (fig. 47-48)
To change the bulb, proceed as follows:
– Open the tailgate;
– Remove the light unit (A-fig. 47) lev-
ering in the point shown by the arrow;
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into place.
– Replace the bulb (B-fig. 48) releas-
ing it from the side contacts, making sure
that the new bulb is correctly clamped be-
tween the contacts;
– Refit the light unit inserting it in its cor-
rect position firstly on one end and then on
the other until it clicks into place (C).
fig. 46
A0A0182b
fig. 47
A0A0648b
fig. 48
A0A0649b