User's Guide

13
Network Name (SSID) —
SSID (Service Set Identification) must be assigned to all
wireless devices in your network. Considering your wireless network security.
Security Mode — Select the security method and then configure the required
parameters. (Options: Disabled, Open, Shared, WEP-AUTO, WPA-PSK, WPA2-PSK,
WPA-PSK_WPA2-PSK, WPA, WPA2, WPA1_WPA2, 802.1X;
OPERATION MODE–CLIENT ROUTER
In the Client Router mode is also known as WISP. The TUBE-2HQPwireless side is
connected to the remote AP (Base-Station) as in Client Infrastructure mode.
Between the wireless and LAN is the IP sharing router function. This is used to
share Client Router connection. The WAN is on the wireless side.
2) Press Site Survey button and look for available wireless networkthen click on the
SSID that you attempt to connect to it; Alfa_B is the SSID that we are going to
connect in this example. PressNextbutton when finished.