User's Guide

WIRELESS SETTINGS

BASIC

◆Wireless On/Off — Enables or Disable the radio. (Default: Turn On)

◆Wireless Mode — There are 4 wireless mode, those are Access Point, WDS

Access Point, WDS Repeater and WDS Client

Note.

If WEP authentication is selected for WDS communication, you will then only have

one set of encryption for the entire channel.

◆Network Name (SSID) — The name of the wireless network service provided by

the TUBE-2HQP. Clients that want to connectto the network must set their SSID to

the same as that of TUBE-2HQP.

◆Multiple SSID — One additional VAP interface supported on the device.

◆Frequency (Channel) — The radio channel that the TUBE-2HQPuses to

communicate with wireless clients.

◆Network Mode — Defines the radio operating mode.