Datasheet

APS08atH

802.3at 8 Port PoE Switch

Changes to specifications and descriptions may change at any time without prior notice

APS08atH is an 8 port 10/100 Ethernet switch

with all 8 PoE ports. It will automatically detect

the presence of an IEEE 802.3af/at compliant

powered device (PD) that will provide power

through the Ethernet port. The switch provides

up to 30W per PoE port and is used to power PoE

AP/Router, PoE IP phone, PoE IP Camera, or Alfa

PD-1000D with an non-PoE device.

APS08atH has the protection mechanism when

power consumption is overloaded. If all the PDs

power consumption is over 125W, the ports will

stop receiving power based on *priority of the

system. The lowest-priority port will be cut by the

system.

* Priority: Port 1 is higher than port 2 (port 1> port 2> port

3> port 4> port 5> port 6> port 7> port 8).

Product Features:

• Deliver Power up to 328ft (100m)

• Plug and Play installation

• Pass Through Data Rates :

8-Port 10/100 Mbps auto MDI/MDI-X

• Maximum 30W output power per

port

• Transmission Method: Store and

forward

A Closer Look:

PAGE 1
APS08atH 802.3at 8 Port PoE Switch APS08atH is an 8 port 10/100 Ethernet switch with all 8 PoE ports. It will automatically detect the presence of an IEEE 802.3af/at compliant powered device (PD) that will provide power through the Ethernet port. The switch provides up to 30W per PoE port and is used to power PoE AP/Router, PoE IP phone, PoE IP Camera, or Alfa PD-1000D with an non-PoE device.
PAGE 2
APS08atH 802.3at 8 Port PoE Switch Technical Specifications: Standard IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af & IEEE 802.3at Interface 8 x 10/100Mbps RJ45 switch ports Power Consumption 130W LED Indicators AC Power on, Ethernet status Link/Ack PoE Act/Status AC Input Voltage 120 ~ 240VAC, 50 / 60Hz AC Input Current 0.8A @ 100 ~ 240VAC Temperature Operating: 0°C ~ 40°C Storage: -10°C ~ 70°C Unit Dimension 290 x 180 x 40mm (W x L x H) Unit Weight 1.