Quick Installation Guide for 16/24/32 ports Dual Speed Hub ADH16SB ADH24SB ADH32SB
FCC COMPLIANCE STATEMENT This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the instructions provided with the equipment, may cause interference to radio and TV reception.
Contents Chapter 1 Introduction ....................................1 Chapter 2 Features & Specifications .................3 Chapter 3 Package Contents .............................5 Chapter 4 Physical Description ........................6 Chapter 5 Installation ......................................9 Chapter 6 Trouble-shooting .............................
11 Introduction Congratulations on your purchase of this rackmount stackable dual-speed hub. Migrating from traditional 10Mbps Ethernet to 100Mbps Fast Ethernet is now simple and affordable with these dual-speed hubs. These high performance 16-port, 24-Port, 32-port 10/100Mbps stackable dualspeed hubs are equipped with 16, 24, 32 RJ45 dual-speed ports, one uplink port and one internal 2-port switch. Typically a dual-speed hub has two independent internal network segments: 10Mbps segment and 100Mbps segment.
Dual-Speed hub with internal switching function automatically switches data traffic between devices running at different speed, which allows communications between ports running at 10Mbps and ports running at 100Mbps. Dual-Speed hub with internal switching function can save money by eliminate the need to purchase expensive Switches for users with mixed speed network environment.
22 Features & Specifications (1) Features Consists of one internal 10Mbps Ethernet segment and one internal 100Mbps Fast Ethernet segment. Supports Auto-Sensing RJ45 ports which automatically sense and select optimum speed and route data traffic to corresponding internal segments. Built-in Uplink selection for the last port to connect with regular straight-through cable to another hub. Network Utilization LEDs provides simple reading on hub s traffic status.
(2) Specifications Standards : IEEE 802.3 & 802.3u 10/100Mbps Ports : RJ45 x 16 (16-Port Rackmount Dual Speed Hub) or RJ45 x 24 (24-Port Rackmount Dual Speed Hub) or RJ45 x 32 (32-Port Rackmount Dual Speed Hub) Hub LEDs : Power, Internal Switch Segment LEDs : Collision, Utilization Port LEDs : Speed Status(10 or 100), Link/Activity Status Internal Switch : 1K MAC Address Table 256KB Buffer Memory Dimensions : 17.3 x 7.9 x 1.75 in./440 x 201 x 45 mm Weight : 5.1 lb./2.
33 Package Contents One Stackable Dual - Speed Hub One power cord User s manual Stacking Cable Rackmountaccessories % 1 10M COL 5 10 4 5 30 50+ UTIL % 1 100M COL 5 10 30 50+ UTIL 16-Port10/100Mbps 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Uplink Switch 100M Power LNK ACT 1 2 3 6 7 8 9 10 11 12 13 14 15 16 Dual Speed Stackable Ethernet Hub 16-Port Rackmount Dual Speed hub % 1 10M COL 5 10 4 5 30 50+ UTIL % 1 100M COL 5 10 30 50+ UTIL 24-Port10/100Mbps
44 Physical Description (1) Panel LED Panel % 1 10M COL 5 10 30 50+ UTIL % 1 100M COL 5 10 30 50+ UTIL Uplink Port RJ45 connectors 16-Port10/100Mbps 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Uplink Switch 100M Power LNK ACT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Dual Speed Stackable Ethernet Hub IN OUT 16-Port Rackmount Dual Speed Hub Stacking ports 100M Col. and Util. LED 10M Col. and Util.
LED Panel % 1 10M COL 5 10 4 5 30 50+ UTIL % 1 100M COL 5 10 Uplink Port RJ45 connectors 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 30 50+ UTIL 100M LNK ACT Switch 100M Power LNK ACT 1 2 3 6 7 8 9 10 Uplink 11 12 13 14 15 16 32-Port 10/100Mbps 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 IN OUT 32-Port Rackmount Dual Speed Hub Stacking ports 10M Col. and Util.
(2) LED LED Color PWR (Power) Green Switch Green (Internal Switch) COL (Segment Collision) Yellow UTIL.
55 Installation 1. Operating Environment These Dual Speed Hubs must be installed and operated within the limits of specified operating temperature and humidity (see previous section under Specifications). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the hub near any heating source such as heater, radiator, or direct exposure to sun. Prevent entering of water and moisture into the unit. If necessary, use dehumidifier to reduce humidity. 2.
Uplink Port Uplink Dual Speed Hub % 1 10M COL 5 10 4 5 30 50+ UTIL % 1 100M COL 5 10 30 50+ 24-Port10/100Mbps UTIL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 100M LNK ACT Switch 100M Power LNK ACT 1 2 3 6 7 8 13 14 15 16 17 18 19 20 9 10 Uplink 11 12 Dual Speed Stackable Ethernet Hub 21 22 23 24 Uplink Port % 1 10M COL 5 10 4 5 30 50+ UTIL % 1 100M COL 5 UTIL 10 30 50+ 24-Port10/100Mbps 1 2 3 4 5 6 7 8 9
5. Connecting the power Connect the power cord to the power socket on the rear panel of the unit. Connect the power cord to the power outlet and turn on power switch. The green Power LED on the front panel should be lit.
66 Trouble-shooting 1. Power LED is not lit Check if the power cord is properly connected to the power outlet and the hub. Make sure the power switch on the hub is turned ON. . 2. Link Status LED is not lit Check the power switch of the network devices attached to the hub, make sure they are turned ON. Check the network cable, make sure it is properly connected to the hub and the network device. Check the network cable, make sure the cable complies with EIA/TIA 568 specification.