User Manual

14 15
3.1 REPLACEMENT OF
THE PILOT NOZZLE.
Unscrew the xing screw
(h) of the pilot light tube.
3.2
Remove the tube (i) from
the seat.
3.3
Remove the pilot nozzle (j)
from the cone-like support
(o) and replace it with the
spare component supplied
in the kit. Reassemble
everything following the
same steps in reverse
order.
h
i
o
Following the conversion, apply the new label
on the product and check that the size of the nozzle
corresponds to that shown on the label.
1 GAS KIT DISASSEMBLY
Remove the gas kit
according to the
instructions in the
appropriate section of the
manual.
2 REPLACEMENT OF THE
MAIN NOZZLE
Unscrew the xing screw (a)
and remove the plate (b)
covering the nozzle.
Unfasten the main nozzle
(e) to the holder screw (d)
by using an 11 mm spanner.
Replace the nozzle with
orice supplied in the kit and
screw it back to the holder
(d).
During these operations,
secure lock the nozzle
holder (d) to keep it from
rotating.
d
e
a
b
CONVERSION
LPG - METHANE
ONLY USE THE COMPONENTS AND PARTS SUPPLIED
WITH THE CONVERSION KIT
WARNING: The following conversion must be performed by
authorized professionals when the oven is completely cold.
Improper installation, adjustment, alteration can
cause property damage or injury.
j