Datasheet

ALFACHARGE WIRELESS CHARGER AL4-J
MAINS WIRELESS CHARGER MODULE
THE RANGE
The Alfacharge range has been designed to withstand the challenging demands of
commercially used environments and is CE marked. The casings are made from
V0-rated (self-extinguishing) high impact polycarbonate and the PCB is populated by
computer-controlled SMT for maximum accuracy and durability.
WARRANTY
The AL4 Series of wireless chargers
are manufactured using rugged
components to provide years of
service in demanding commercial
environments and are covered by a
three year return to base warranty.
ACCESSIBLE WIRELESS CHARGERS FOR COMMERCIAL
INSTALLATIONS
Wireless charging is increasingly becoming the preferred method of maintaining battery
power in mobile devices, with most of the latest designs from the major manufacturers
including wireless charging as standard.
The aesthetically pleasing design of the AL4-J wireless charger can be easily installed
into furniture such as desks, bedside tables, media benches and counter tops, making it
ideal for tough, publicly accessible areas where different users with a variety of mobile
devices come and go. The modules are water resistant to IP65 and can withstand any
spills and constant use. The high friction charging surface encourages the phone to stay
in place. The installation couldn’t be simpler, insert the unit through an Ø80.0mm hole,
secure from below and connect to power with the supplied transformer.
The wireless receiver of the charging unit will automatically detect the presence of
suitably enabled mobile devices and will typically charge through a case up to 3.0mm
thick, with a Tx-Range of 5mm.
Designed for integration into
furniture.
• CE marked.
• Phone communicates every
millisecond to establish
correct charge.
• Unit rated to IP65
• Foreign object detection &
activation.
• Overcharge and power
surge protected
• LED to confirm correct
operation.
• Customisable, to include
corporate logo and reflect
corporate colours.
The AL4-J is ideal for retrofit hotel
room installations and offices.
Alfatronix wireless charging
module AL4-J
The wireless charging unit can be easily installed through an
Ø80.0mm hole in any flat surface. Cables are secured by the
retaining plate completing the installation.
Charging coil centre.
Cover plate grips
and secures wires
into position.
Table top
min. 19.5mm
max. 50.0mm
Mobile phones with cases
up to 3.0mm thick will
normally charge
successfully.
Power supply
plug.