Datasheet

ManualsBrandsAlfatronix ManualsBatteries and ChargersBattery Guard, 10A

Input voltage range

9-32Vdc (Automatic Referencing)

Output voltage

Equal to input voltage when operating (maximum of 100mV drop across terminals)

Transient over current rating (% of

continuous value)

110% for 10s

200% for 1s

300% for <0.5ms

On over current shut down there is a retry every 30s

Quiescent current when shutdown

(when running)

Typ 2mA @13.6V, (PT40/60 Typ 4mA @13.6V) (PT100/200 Typ 6mA @13.6V)

Isolation

>400Vrms between input, output and case

Transient voltage protection

Meets ISO7637-2 International standard for 24V vehicles

Electrostatic voltage protection

Meets ISO10605, ISO14892, >8kV contact, 15kV discharge

Operating temperature

-25ºC to +60ºC to meet this specification table

Storage temperature

-25ºC to +100ºC

Ingress protection

IP65

Casework

E coated aluminium, glass filled polycarbonate

Connections

PT10/20 Insulated 6.3mm push-on flat blade connectors

PT40/60 M6 ring tongues

PT100/200 M10 ring tongues and switch for additional over ride connection

6.3mm push-in flat blade connectors for earth, program, switch, override and alarm

Programming lead provided

Output indicator

Green LED adjacent to programming terminal (for programming and output indication)

Mounting method

PT10/20 tie wrap to wiring

PT40/60/100/200 3off pozi screws

Safe area protection: over current

Limited by current sensing circuit

Over heat

Limited by temperature sensing circuit

Transients

Protected by filters and rugged component selection

Catastrophic protection

Set by external input fuse (set by application demands) and ground line fuse 1A

Approvals (pending)

2004/108/EC The general EMC directive

Regulation 10.04 The automotive directive

93/68/EEC The CE marking directive

Markings (pending)

CE and E marked

Made in the European Union by Alfatronix Ltd, Great Britain

EU-EN-PV-0710

Part Number

Power

Input Voltage

Dimensions

Weight

PT10

10A continuous