Datasheet

Powerverter
24Vdc to 12Vdc Voltage conVerters
24vdc to 12vdc voltage converters
These products offer a convenient wayto operate mass produced 12Vdc equipment
such as cell phones, in car entertainment, professional communications, telematics
equipment, refridgerators, televisions etc. from the 24Vdc mobile electrical systems
found on diesel engined vehicles and vessels.
Fast InstallatIon
All the units consume an off load current of less than 15mA, which is probably less
than the self discharge current of the vehicle’s battery. In most cases this can be
ignored, speeding the installation by removing the need to fit a remote switch.
All products fit onto a “Click ‘n’ Fit” mounting clip which is fixed in three points
allowing it to be mounted on uneven surfaces. It is easy to fit the clipinto awkward
places and then simply click the unit into position.
A fixing kit for din rail installation is also available.
A green LED indicates when there is output from the converter. This gives
reassurance to the installation engineer and speeds fault finding.
New PV50s, 50Amp converter
Galvanically isolated units are suitable for
marine applications and come complete
with the green tamperproof label for
petrochemical applications.
Many units in the PowerVerter range are also available as IP65 Versions. Please add the suffix -RU to the part number when ordering.
a comPrehensIve
range
There are 14 products in the range
from3A to 50A in isolated or common
earthconfigurations. They have been
optimised for high volume 24Vdc to
12Vdc applications such as on heavy
goods vehicles, coaches, buses, forestry
and agricultural vehicles, as well as
commercial and leisure marinevehicles.
tamPer ProoF
These units are IP53, so there are no
ventilation holes to permit stray objects,
dust or water droplets to enter the case,
there are no external fuses to be
tampered with. Fuses will only blow if
there is a fault so there is noneed to
make them accessible.
Product varIants
Many PowerVerters and DD Series
products can be configured with
alternative output voltages etc. for
specialist applications. Please call our
sales team to discuss your requirements.