Use and Care Manual

Shower Drain Installation Instructions
PREPARATION
● Before Installation
Before installing any Alfi Brand product in your home, you should make sure that you are in compliance with all local plumbing
codes and regulations.
● Check The Accessory Items
Before installation, please check the condition of the product and, if appropriate, its components. If there is any problem with the
product and/or its components, please contact the store you purchased it from for a replacement. As soon as you have inspected
your product, please return it to its original packaging until you are ready to install it.
● Handle With Care
To protect its finish and avoid damage before and after installation, please handle the product with care. For care and cleaning
tips after installation, please refer to the Care and Cleaning Guide in this instruction guide.
MATERIALS & TOOLS
Safety glasses, assorted screwdrivers, silicone sealant, flooring mortar, level, and other tools as needed
INSTALLATION FOR SQUARE SHOWER DRAINS
*IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely.
*Drawings are for reference only. Please refer to actual product for exact size, shape and parts.
1. Determine the desired position of the shower drain.
Relocate rough-in pipework if necessary. Cover with flooring mortar as needed.
2. Assemble the drain grate to the drain body.
3. Assemble the clamping ring to the drain flange, and then install the gasket into the drain flange.
Fasten the assembly with the screws.
4. Insert the drain body into the gasket.
Push the drain body down to ensure the correct height.
www.alfitrade.com
Kitchen & Bath Products, Inc.
Drain Grate
Drain Body
Gasket
Screws
Drain Flange
Clamping Ring