Use and Care Manual

2
SHOWER DRAIN
INSTALLATION INSTRUCTIONS
5. Install the drain flange to the rough-in pipe.
Run water through the drain and check for leaks.
6. Adjust the shower drain unit to level and stabilize it.
The top of the drain body should be flush with the surface of the finished floor.
7. Apply a bead of silicone sealant around the outside of the shower drain.
Complete the installation by installing the preferred flooring.
INSTALLATION FOR LINEAR SHOWER DRAINS
*IMPORTANT: Recommended for professional installers only. The installer maintains responsibility for installing the product safely.
*Drawi
ngs are for reference only. Please refer to actual product for exact size, shape and parts.
1. Determine the desired position of the shower drain.
Relocate rough-in pipework if necessary. Cover with flooring mortar as needed.
2. Assemble the drain grate to the drain channel.
3. Assemble the clamping ring to the drain flange, and then install the gasket into the drain flange.
Faste
n the assembly with the screws.
Silicone sealant
Run water
Check
for
leaks
Level
Drain Grate
Drain Channel
Height Adjustable Leveling Feet
Gasket
Clamping Ring
Drain Flange
Screws