Use and Care Manual

3
SHOWER DRAIN
INSTALLATION INSTRUCTIONS
4. Insert the drain channel into the gasket.
Push the drain channel down to ensure the correct height.
5. Install the drain flange to the rough-in pipe.
Run water through the drain and check for leaks.
6. Adjust the leveling feet to level and stabilize the shower drain unit.
The top of the drain channel should be flush with the surface of the finished floor.
7. Apply a bead of silicone sealant around the outside of the shower drain.
Complete the installation by installing the preferred flooring.
CARE AND CLEANING GUIDE
Alfi Brand stainless steel shower drains are designed to minimize cleaning and maintenance. High-pressure flushing is the most
effective method of cleaning, and, if performed regularly, will keep the drains clean in most situations. Only use a mild soap and a
soft cloth for cleaning. DO NOT use any abrasive cleaners or scrub pads. DO NOT allow household cleaning agents, such as bleach,
sit on your drain cover for a long period of time. In cases where a stainless steel cleaner is necessary, rinse the drains with plenty of
water after use.
Run water
Check
for
leaks
Leveling feet
Silicone sealant
Distributed by Alfi Trade Inc. www.alfitrade.com