Installation Manual ALFIbrand.
Parts Identification 1 3 2 7 6 NO NO PART NAME material SKU name QTY Figure FIGURE QTY 8 9 10 NO material PART NAME name SKU NO 11 R-FIRE_ 22 66 Plastic Pipe Outlet Tub Cover 22 The bathtubR-FIRE_Cover cover 11 77 SealRing ring RubberRing Rubber 33 33 88 11 99 11 10 10 44 Fire Hot Tub Fire Hot Tub Outdoor bathtub Barbar Clipclasp R-FIRE_Clip R-FIRE_Wind- Windwind Screenscreen Screen R-FIRE_Coil Heating Coil heating coil 55 The Tool tool hexangonHex wrench Key 1 QTY Figur
Installation of Cover Installation of Coil Seal Rubber Ring 2
Wind Screen & Basket Assembly Hang fire basket inside coil, then place Ash Tray underneath. Attach Wind Screen as seen in the image above. Drainage After Use To drain tub after use, attach plastic pipe to drain and ensure water drains onto ground or lawn.
Safety & Use To maximize fun and safety during use of the FireHotTub, please follow our installation guidelines and ensure that all safety measures are met. 1. Environment -Decide in advance where you would like to place your new tub. Remember that the area must be clear of brush and debris, on a flat solid surface, in the open air (not underneath a shelter or roof) and ONLY outdoors. -Consider recycling the water by draining directly into your garden or on your lawn.
