Troubleshooting Guide

English 15
ATTENTION
Changing the spray type when the
lever of the high-pressure gun is
pressed down
Damage to the spray lance
Release the lever of the high-pressure
gun before changing the spray type.
2. Select the spray type. To do this,
turn the 3-in-1 Multi Jet spray lance
until the required spray indicator is
visible at the top.
3. Switch on the device ("I/ON").
4. Unlock the lever of the high-pres-
sure gun.
5. Press the lever of the high-pressure
gun.
The device switches on.
Operation with washing brush
ATTENTION
Paint damage
Damage to surfaces due to contami-
nated washing brush
Make sure the washing brush is free of
dirt or other particles before you use it.
Note
When using washing brushes, the de-
vice works with low pressure. There-
fore, detergents can be added.
1. Insert the washing brush into the
high-pressure gun and fasten it by
turning it 90°.
Operation with detergent
 DANGER
Failure to observe the safety data
sheet
Serious damage to health due to im-
proper use of the detergent
Observe the safety data sheet of the
detergent manufacturer, in particular
the instructions for personal protective
equipment.
Note
A Plug 'n' Clean detergent bottle is re-
quired for operation with detergents.
KÄRCHER detergents can be pur-
chased ready for use in a Plug 'n'
Clean detergent bottle.
1. Remove the lid from the Plug 'n'
Clean detergent bottle.
2. Press the detergent bottle into the
Plug 'n' Clean detergent connection
with the opening facing downwards.