Troubleshooting Guide

English 17
Transport
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift up the device by the carrying
handles and carry it.
Pulling device
1. Pull out the transport handle until it
audibly engages.
2. Pull the device by the transport han-
dle.
Transporting the device in a
vehicle
1. Before horizontal transport, pull the
Plug 'n' Clean detergent bottle out of
the holder and close it with the lid.
2. Secure the device against shifting
and tipping.
Storage
몇 CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during storage.
Keep the device safe
1. Place the device on a level surface.
2. Disconnect the spray lance from the
high-pressure gun.
3. Press the disconnect button on the
high-pressure gun and disconnect
the high-pressure hose from the
high-pressure gun.
ATTENTION
Damage to the high-pressure hose
Damage to the high-pressure hose due
to incorrect direction of rotation
Observe the direction of rotation of the
hose reel when winding.
4. Use the crank handle to turn the
hose reel counterclockwise and
wind up the high-pressure hose.
5. Stow the mains connection and ac-
cessories on the device.
Before prolonged storage, observe ad-
ditional instructions, see chapter Care
and service.
Frost protection
ATTENTION
Risk of frost
Devices that are not completely emp-
tied can be destroyed by frost.
Fully empty the device and accesso-
ries.
Protect the device from frost.
The following must be met:
● The device is disconnected from the
water supply.
● The high-pressure gun is separated
from the high-pressure hose.
1. Switch on the device “I/ON”.
2. Wait a maximum of 1 minute until no
more water comes out of the high-
pressure hose.
3. Switch off the device.
4. Store the device with all accessories
in a frost-proof room.