Alfred DB2 Series Programming Instructions ENVELOPER Alfred International Inc. reserves all rights for the final interpretation of the following instructions. A\ All design and specifications are subject to change without notice
Congratulations on Installing your new Alfred Smart Lock! Next step is to download the Alfred Home App. All Programming and setting features can be completed within the Alfred Home App while standing in Bluetooth Range of your Alfred Lock.
Failure to follow the below Instructions could result in damage to the product and cold the factory warranty. The accuracy of the door preparation is critical to allow proper functioning and security of this Alfred Product. Misalignment of the door prep and lock can cause performance degradation and hinder the security functions of the lock. Finish C; This locks st is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long lasting finish.
Touch screen keypad Status indicator(Green) 1#Status indicator(Red) 2# Status indicator{Battery) 3# = Reset button Cylinder{optlonal} Thumb turn Status Indicators ~— o/ 1#. Unlocked or setting succeed 2#. Locked or setting 3#. Low battery Warning Micro USB Reboot button power port SEED Master and User PIN codes have 4-10 digits, the default Master PIN code is [12345678]. Please change it prior to programming of the lock.
Master Mode: The Master Mode can be entered by entering PIN Code+#” to program the lock. Master PIN code: The Master PIN Code is used for programming and for feature settings. The default Master PIN Case must be changed after Installing. The Master PIN Code will also ope ¢ the lock In Away Made and Privacy Mode, Simple PIN Code Rule For your security, we have set up a rules to avoid simple pin codes that can easily be guessed. Both the Master PIN Code and User PIN Codes dean to follow these rules.
Status LED: Located on outside escutcheon. Green LED illuminate when the door is unlocked or for a successful settings change. Red LED will illuminate when the door is locked or when there is an error in settings input. User PIN code: The User PIN Code operates the Lock. They can be created between 4 and 10 in length but must not break simple pin code rule. You can assign a User Pin code to specific members within the Alfred Home App.
-Change Default Master PIN code Changing Master PIN Code can be programmed in Settings options on the Alfred Home App or in Master Mode Menu at the Lock. 1. Touch Keypad screen with your hand to activate lock. (Keypad will illuminate) 2. Enter Master Mode Mani by Entering twice and then the 4-10 digit Master Pin Code followed by 3. Enter “1” to select Modify Master Pin Code. 4. Enter NEW 4-10 Digit Master PIN Cads followed by 5.
-Auto Re-lock Auto Re-Lock Feature can be programmed in Settings options on the Alfred Home App or In Master Made Menu at the Lock. Master Soda Mani Instructions: 1. Touch Keypad screen with your hand to activate lock. (Keypad will illuminate) 2. Enter Master Mode Menu by entering Twice and then the Master PIN Cods followed by 3. Enter "4 to enter Auto Re-lock menu 4.
ree for Master Mode Menu n Modify Master PIN code E n Add user PIN code E n Delete user PIN code Enable — 4| Auto re-lock English ] [= Master Mode — 3| Portuguese 5/ Language n [ itchiness | ‘— 4| Disable speaker —1 6| Enable Away Mode Enable Bluetooth Bluetooth settings E Disable Bluetooth —.
| Unlock the door | 1. Unlace the door from outside -Use PIN code key » » Place palm over lock to wake up the keypad. Input User PIN Code or Master PIN Code and press to confirm. 2. Unlock the door from inside -Manual thumb turn Turn the thumb turn on inside body (Thumb turn will be in the vertical position when unlocked) Lock the door 1. Lock the door from outside Auto Re-lock Mode If Auto Re-Lock Mode is enabled, the latch bolt will be extended and locked automatically after approx.
[ use Visual PIN Protection | Fak User can prevent PIN code exposure from strangers by entering additional random digits before or after their User Pin Code to unlock their device. In both cases the User Pin code is still intact but to a stranger it cannot easily be guessed. wp Fake g » PIN Use Emergency Micro USB Power Port and Reboot Button Micro USB.
For support, please reach out to: You can also reach us at 1-833-4-ALFRED (253733) www.alfredinc.