Use and Care Manual

Table Of Contents
5
ASSEMBLY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present.Place all parts on a
soft, level surface for assembly. NOTE: it is recommended to use TWO PEOPLE to assemble this gas fire pit. Estimated
assembly time: 60 minutes. | Do NOT overtighten hardware!
1
Hardware: N Bolt (6x25mm) x 8
P Washer (6mm) x 8
1
Locate 4 Panels D/E/F. NOTE: There is a hole at the bottom of
each Side Panel E. The hole should face DOWN. Place a
Washer P on each of 8 Bolts N and insert through holes in
sides of Side Panels into the holes of Leg Panels D/F.
Tighten all Bolts
N with Hex Key S.
E
D
F
/HJ
E
1
P
Holes
Holes
Holes