Use and Care Manual
7
ASSEMBLY
4
Carefully turn the assembled fire pit back upright.
Place the Burner B into the hole in the Table Top C. Make sure
the Control Knob on the Burner faces the Front Door Panel D.
5
Pour the Fire Glass J around the Burner. Be careful not to
obstruct pilot light housing. Put the Removable Burner
Cover A on the Burner.
When the fire pit is NOT in use, or after use, when the fire
pit has cooled COMPLETELY, cover it with the Protective
Cover I. DO NOT PUT THE PROTECTIVE FIRE PIT COVER
ON A HOT FIRE PIT.
4
5
D
I
J
Unscrew the igniter button and insert a AAA Battery with
positive end facing out. Screw the button back onto the control
panel.