Instructions / Assembly

56-1382

31" Straight Mesh Square Table

Assembly Instructions

Parts List Quantity

Table Top

Table Leg

Center Plate

Short Bolt

Long Bolt

Flat Washer

Lock Washer

Plastic Cap

ASSEMBLY

We suggest you assemble the product on a soft flat surface to protect the finish. Two

people are required to assemble this product.

Step 1. Place the TABLETOP face down on a soft flat surface. Attach the LEGS to the table using

8HEX SHORT BOLTS, FLAT and LOCK WASHERS. The lock washer is fitted against the bolt

head and the flat washer between the table top and lock washer. Finger-tighten the bolts.

Repeat this process for each of the four legs.

Step 2. Place the CENTRE PLATE between the four legs. Align the holes and using the 8HEX LONG

BOLTS, FLAT and LOCK WASHERS attach to the legs. Use the same process when attaching

the bolts. Finger-tighten only at this stage.

Step 3. When all bolts and washers are in place, tighten all bolts firmly , but do not over-tighten.

Tighten the bolts to the table-top first ensuring that you tighten the bolts in a diagonally

opposite order.

Step 4. Using 2 people, turn over the assembled table and put plastic caps on all nuts.

Caution:

This unit is manufactured with cast aluminum parts and is brittle. DO NOT force any part of the

assembly and DO NOT over-tighten the bolts. This could result in serious damage.

1 pc

4 pcs

1 pc

8 pcs

16 pcs

PAGE 1
56-1382 31" Straight Mesh Square Table Assembly Instructions Parts List Table Top Table Leg Center Plate Short Bolt Long Bolt Flat Washer Lock Washer Plastic Cap Quantity 1 pc 4 pcs 1 pc 8 pcs 8 pcs 16 pcs 16 pcs 16 pcs ASSEMBLY We suggest you assemble the product on a soft flat surface to protect the finish. Two people are required to assemble this product. Step 1. Place the TABLETOP face down on a soft flat surface. Attach the LEGS to the table using 8HEX SHORT BOLTS, FLAT and LOCK WASHERS.