Owner's Manual

INCANDESCENT LIGHT BULB REPLACEMENT:

Should you need to replace the light bulbs in your

Alfresco

™ Gourmet Grill, please refer to the follow-

ing steps :

REMOVE THE

LIGHT COVER

The light covers are supported by a spring

mechanism on the light fixture. Simply pry

open the light cover from the left or right

sides by hand only.

DO NOT USE ANY TOOLS as you might

chip the tempered glass cover.

REMOVE THE LIGHT BULB

Reach inside the light fixture and remove the light

bulb by pulling it straight out of the socket.

INSTALLING A NEW LIGHT BULB:

NOTE: When replacing light bulbs, use a soft clean

cloth (cotton or paper towels) when handling lights.

Always keep halogen lights free of fingerprints and

grease when replacing. Because of the light bulb’s

very high operating temperature, grease or finger-

prints left on the light bulb might reduce the bulb’s

life.

Insert a new light bulb using a clean cloth and do not force the light bulb in the socket. Very little effort is

required for the bulb to “SNAP” and lock into place.

Look at the bulb and verify that no fingerprints are left on it. Wipe off any fingerprints and or grease that

might have accidentally come in contact with the glass of the light bulb.

Replace the light cover by inserting it into the light fixture at a slight angle until it “SNAPS” into place.

Power up your

Alfresco

™ Gourmet Grill and verify the light bulb operation by turning on the light