Wind Shield Installation

OUTER UP 90 FLANGE IS OUTSIDE AND

AGAINST BBQ PERIMETER RING AS SHOWN

REAR

BOTTOM

VIEW

ALFRESCO WIND SHIELD

AWS-30, AWS-36, AWS-42 & AWS-56

WIND SHIELD INSTALLATION

Last revised: MARCH 16, 2015

LIFT BBQ FROM ONE SIDE AT A TIME AND PLACE WIND

SHIELD UNDER THE BBQ PERIMETER RING

WIND SHIELD

PIC. 1

WOODEN BLOCK MAY BE USE

TO SUPPORT BBQ

PIC. 2

NOTES:

 WOOD BLOCKS MAY BE USE TO ASSIST IN

LIFTING AND SUPPORTING THE BBQ WHILE

PLACING WIND SHIELD UNDER THE BBQ

PERIMETER RING (SEE PIC. 2)

 WIND SHIELD USES 90 DEG UP FLANGE’S

ON 3 LOCATIONS TO LOCK UNDER THE BBQ.

(ONLY 2 LOCATIONS FOR THE AWS-30)

 OUTER FLANGE’S MUST FIT ON THE OUTSIDE

OF BBQ PERIMETER RING (SEE PIC.4)

 INSIDE FLANGE’S MUST FIT ON THE INSIDE

AND UNDER THE BBQ PERIMETER RING

(SEE PIC.3)

UP 90 FLANGE TO FIT OUTSIDE

OF BBQ PERIMETER RING

(SEE PIC 4)

UP 90 FLANGE TO FIT

INSIDE OF BBQ PERIMETER

RING (SEE PIC 3)

PIC. 3

PIC. 4

INSERTING OUTER UP 90

FLANGE INSIDE OF BBQ

PERIMETER RING

BBQ PERIMETER

RING

PAGE 1
AWS-30, AWS-36, AWS-42 & AWS-56 WIND SHIELD INSTALLATION NOTES:  WOOD BLOCKS MAY BE USE TO ASSIST IN LIFTING AND SUPPORTING THE BBQ WHILE PLACING WIND SHIELD UNDER THE BBQ PERIMETER RING (SEE PIC. 2)  WIND SHIELD USES 90 DEG UP FLANGE’S ON 3 LOCATIONS TO LOCK UNDER THE BBQ. (ONLY 2 LOCATIONS FOR THE AWS-30)  OUTER FLANGE’S MUST FIT ON THE OUTSIDE OF BBQ PERIMETER RING (SEE PIC.4)  INSIDE FLANGE’S MUST FIT ON THE INSIDE AND UNDER THE BBQ PERIMETER RING (SEE PIC.