Specifications

Document 90-00067 A Algo Communication Products Ltd [phone]
2014-09-12 4500 Beedie St Burnaby BC Canada V5J 5L2 [e-mail]
Page 32 www.algosolutions.com
One of two files can be uploaded on the Provisioning Server (for
access via TFTP, FTP, or HTTP):
Generic (for all Algo 8188 Speakers) algop8188.conf
Specific (for a specific MAC address) algom[MAC].conf
MD5 Checksum
In addition to the .conf file, an .md5 checksum file must also be
uploaded to the Provisioning server. This checksum file is used to
verify that the .conf file is transferred correctly without error.
A tool such as can be found at the website address below may be
used to generate this file:
http://www.fourmilab.ch/md5
The application doesn’t need an installation. To use the tool, simply
unzip and run the application (md5) from a command prompt. The
proper .md5 file will be generated in the same directory.
If using the above tool, be sure to use the “-l” parameter to
generate lower case letters.
Generating a generic configuration file
1. Connect 8188 to the network
2. Access the 8188 Web Interface Control Panel
3. Configure the 8188 with desired options
4. Click on the System tab and then Maintenance.
5. Click “Backup” to download the current configuration file
6. Save the file settings.txt
7. Rename file settings.txt to algop8188.conf
8. File algop8188.conf can now be uploaded onto the Provisioning
server
If using a generic configuration file, extensions and credentials have
to be entered manually once the 8188 Ceiling Speaker has
automatically downloaded the configuration file.