Specifications

Document 90-00067 A Algo Communication Products Ltd [phone]
2014-09-12 4500 Beedie St Burnaby BC Canada V5J 5L2 [e-mail]
Page 9 www.algosolutions.com
After installation and testing, gently work the speaker grill into its friction fit
position and ensure it is evenly flush to the housing around the edge. The
speaker grill is intentionally tight to prevent falling from the ceiling.
A tool supplied with the 8188 Ceiling Speaker can be used to remove the
grill. If lost, a small Allen key or heavy duty paperclip bent into an L shape
can be used to remove the grill by pulling close to the edge.
Air Handling Spaces UL2043
The 8188 Ceiling Speaker was tested and found to be compliant with
UL2043 requirements by an independent NRTL registered lab and is
therefore suitable for installation in air handling spaces. A copy of the test
report is available by request.
Suspended Installation
To suspend the 8188 Ceiling Speaker from a ceiling or truss you will need
additional materials not included with the speaker:
 ¼” -20 Eye-bolt
 Thread locking adhesive
 Load bearing cable or chain
For suspended installations, the trim ring is not used. The four clamps
may also be removed for aesthetics. The back housing and grill may be
painted if desired but ensure the speaker and wire connectors are properly
masked.