Installation Guide

The submersible pump and components included in this kit

allow for pressurized watering of your garden from single

or linked rain barrels.

Installation Instructions

1) Locate and screw the pump fitting into the top of the

pump. (Additional fittings are included in the box should

you ever wish to use this system with a different diameter

hose or the Algreen 'Madison' Rain Barrel.)

2) Connect the female end of any standard garden hose

to the pump fitting. (The hose included with the 'Castilla'

rain barrel may also be used.)

3) Remove the gray screen from the top of the rain barrel

and put it aside.

4) Carefully lower the pump onto the bottom of the rain

barrel through the screen opening, keeping the pump cord

and garden hose as straight as possible.

5) When you are ready to water, simply plug in the pump

to any GFCI equipped 120V outlet. Unplug the pump to

stop watering or when the barrel(s) are empty to avoid

damage to the pump.

Linking 2 Barrels Together

Barrels can be linked together at either the top over flows or

bottom outlets. This kit includes a brass 'female to female'

hose adapter that allows 2 barrels to be linked from the bottom

using the garden hose(s) supplied with each rain barrel.

1) Screw the brass hose adapter to the end of one of

the hoses attached to the bottom of the 'Castilla'

rain barrel.

2) The other end of the adapter can

now be screwed on to the hose from

the other barrel, or directly to the

bottom of the 2nd barrel.

For more information on green living,

log on to:

www .algreenproducts.com

'Castilla' Rain Barrel Pump & Linking Kit

500 GPH

Pump

Fitting

Brass

Hose

Adapter

PAGE 1
'Castilla' Rain Barrel Pump & Linking Kit The submersible pump and components included in this kit allow for pressurized watering of your garden from single or linked rain barrels. 500 GPH Pump Installation Instructions 1) Locate and screw the pump fitting into the top of the pump. (Additional fittings are included in the box should you ever wish to use this system with a different diameter hose or the Algreen 'Madison' Rain Barrel.
PAGE 2
'Madison' Rain Barrel Pump & Linking Kit Top Fountain Fitting The submersible pump and components included in this kit allow for pressurized watering of your garden from single or linked rain barrels. Bottom Fountain Fitting 500 GPH Pump Installation Instructions 1) Locate and screw the pump fitting into the top of the pump. (Alternate barbed fittings are included in the box should you ever wish to use this system with a different diameter hose.