Manual

Alice 828 Mk3
User Handbook and
Operating Notes
The Alice 828 Mk 3 is completely enclosed in a three-piece
mild steel box. The rear termination panel is bolted to the
main chassis during assembly and is not normally removeable.
Access to the electronics is by removing the base tray which is
secured by four M4 bolts.
All the electronics are mounted on printed circuit boards which are
secured to the main chassis top panel by the potentiometer fixings and
braced by connectors on the rear panel and the 10-way ribbon cable
which connects the channel, group and monitor boards.
In the rare event of a component malfunction or failure, any module
may be removed by disconnecting the ribbon cable, slackening the
M4 bolts holding the rear panel, freeing the input terminations and
releasing the control fixings.
The mains power converter assembly is mounted on a steel sub-frame
in the right-hand end of the mixer behind the rear mounted meters.
Standard finish is in charcoal grey semi-gloss stove enamel, with
abrasion resistant white screen printing. Other colours may be
available upon request.
The 828 Mk3 was designed by Ted Fletcher, it is personally supervised,
manufactured, hand assembled by Alice Ltd totally in the UK.
Construction
pg | 10