Manual

Alice 828 Mk3
User Handbook and
Operating Notes
Channel Inputs
a) Microphone. All microphone inputs are transformer balanced
and floating via a standard 3-pin XLR type female connector.
The input impedance is designed for 200-ohm microphones,
but will accept other types down to 30 ohms impedance.
The minimum input level for 0VU output is -80dBu (approx.
0.03mV); the maximum input level is -10dBu (approx. 240mV).
If high levels are anticipated, attenuator pads should be used
in the mic circuits.
Phantom power (48V) is available to all mic channels, the
switch and indicator light are in the monitor section.
b) Line level. Mono line level inputs are via 3-pole jack sockets.
They will operate from any audio feed balanced or unbalanced.
The inputs are transformer isolated.
Input levels of -30dBu up to +20dBu can be handled by the
mono channels.
pg | 12