Manual

Each mono channel has two inputs, both are
transformer balanced.
The mic input is a standard 3-pole XLR female socket
(pin 1 ground, 2 hot & 3 cold signal), and the line
input is high impedance balanced via a standard 1/4"
(6.35mm) 3-pole jack socket.
A push-button switch selects the required input, and
the continuously variable rotary gain control has a
range of 50dB on mic. and 24dB on line.
The equaliser has HF and LF boost and cut and a
very useful MF section which allows the frequency
of a boost or cut to be varied over a wide range (see
SPECIFICATION). A push-button switch allows the
equaliser section to be completely by-passed
if required.
Mono Mic/Line Channels
Alice 828 Mk3
User Handbook and
Operating Notes
pg | 04