Manual

Alice 828 Mk3
User Handbook and
Operating Notes
Groups
pg | 06
The two output groups each have a line level
input via a rotary gain control, designated ‘aux
in L & R.
Each group has a simple but extremely effective peak
limiter, with individual threshold and ‘on’ controls, and
status indicating LEDs.
Two auxiliary outputs are provided, one pre-fader
(aux 1) and one post (aux 2). The output master send
controls are above the group faders. The left group
carries the master aux 1 control, and the right group
the master aux 2.
A pan-pot allows each channel to be adjusted in a
stereo mode between the two output groups, and a
latching push-button switch connects the pre-fader
channel signal to the monitor section.
The 60mm conductive plastic track fader is fitted on
channel 1 with an electronically controlled micro-
switch for activation of muting systems, red lights etc.
A mono post-fader direct line output is available on a
standard 1/4" (6.35mm) 2-pole jack, in addition to the
stereo mix via the pan pot.